u-boot-dfu-20240930

- Fix Kconfig dependencies for DFU_OVER_USB

Transfer initiation and completion for the non-zero Endpoints are
handled by cdns3_ep_run_transfer() and cdns3_transfer_completed()
respectively.

Failing to flush the cache associated with the TRB Pool within
cdns3_ep_run_transfer() results in the transfers never being initiated.
Similarly, failing to invalidate the cache associated with the TRB pool
within cdns3_transfer_completed() results in the transfers never being
completed.

Fix this.

Fixes: 7e91f6ccdc84 ("usb: Add Cadence USB3 host and gadget driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>

Fix link errors caused by missing Kconfig dependencies:

1. DFU_OVER_USB compiles common/dfu.c which calls g_dnl_clear_detach()
which is implemented in drivers/usb/gadget/g_dnl.c which needs
USB_GADGET_DOWNLOAD. Test case:

 $ printf "CONFIG_USB_GADGET_DOWNLOAD=n\nCONFIG_USB_FUNCTION_FASTBOOT=n" \
       >>configs/am62px_evm_a53_defconfig
 $ make am62px_evm_a53_defconfig
 $ make CROSS_COMPILE=aarch64-linux-gnu-
 [...]
 common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach
 [...]

2. With the above fixed, the same build causes:

 common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'

This is because SPL_DFU compiles common/spl/spl_dfu.c which calls
run_usb_dnl_gadget() which is implemented in common/dfu.c which needs
DFU_OVER_USB.

Therefore add these dependencies to Kconfig.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240910102751.3182982-1-jerome.forissier@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

In case CONFIG_USB_MUSB_HOST is set, the ux500_gadget_ops get overridden
to musb_usb_ops . Simply set the ops one way or the other depending on
whether CONFIG_USB_MUSB_HOST is set or not.

Fixes: ac4bf5d48a9e ("usb: gadget: ux500: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240818200425.89045-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

The revision is different for these, add the additional check as in
xhci-dwc3 core_init code.

Equivalent upstream Linux patch:
690fb3718a70 ("usb: dwc3: Support Synopsys USB 3.1 IP")

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>

There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.

Signed-off-by: Tom Rini <trini@konsulko.com>

Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

In some cases (consistently in my case with an embedded board) the
ethernet controller will time out on the first init but always succeed
after reset.

Let's reset the controller during probe so we always start with it in a
known state, and don't have wait for the first asix_wait_link() to
time out.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

u-boot-dfu-20240711

Usb gadget:
- A welcome cleanup: epautoconf workaround is dropped to use
  .match_ep() instead
- Introduce handle_interrupts() op for USB_GADGET_GENERIC, which
  allows a per-driver interrupt handling

Fastboot:
- Fix mssing include when building with TCP only

Replace one type of terrible code formatting with a different
type of terrible code formatting. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hector Martin <marcan@marcan.st>