u-boot.git/drivers/video/Makefile, branch v2013.04

Merge branch 'for-v2013.04'

2013-03-29T12:54:10Z

Conflicts: drivers/video/Makefile Signed-off-by: Anatolij Gustschin

lcd, pxafb: move the pxafb to drivers/video

2013-03-21T08:38:21Z

Since the lcd code was compiled unconditionally for pxa also add CONFIG_PXA_LCD to the boards using this framebuffer. Since driver/video contains video and lcd drivers, add lcd to the name to make clear it belongs to common/lcd.c. cc: Anatolij Gustschin cc: Cliff Brake cc: Marek Vasut Acked-by: Marek Vasut Signed-off-by: Jeroen Hofstee

lcd, mpc8xx: move the mpc8xx driver to drivers/video

2013-03-21T08:17:39Z

Since the lcd code was compiled unconditionally in arch also add CONFIG_MPC8XX_LCD to the boards using this driver. cc: Anatolij Gustschin cc: Wolfgang Denk Signed-off-by: Jeroen Hofstee

lcd, amba: remove this driver since it is not used

2013-03-21T08:12:31Z

Since CONFIG_VIDEO_AMBA is not set by any board, it does not seem to be used, so remove it since there is no way to (compile) test it. cc: Alessandro Rubini cc: Anatolij Gustschin Acked-by: Alessandro Rubini Signed-off-by: Jeroen Hofstee

video: add a driver for the bcm2835

2013-03-20T14:30:00Z

The firmware running on the bcm2835 SoC's VideoCore CPU manages the display controller. Add a simple "LCD" driver that communicates with the firmware using the property mailbox protocol. This configures the display and frame-buffer to match whatever physical resolution the firmware chosen when booting, which is typically the native resolution of the attached display device, presumably unless otherwise specified in config.txt on the boot media. Enable this driver in the Raspberry Pi board configuration. Signed-off-by: Stephen Warren Acked-by: Anatolij Gustschin

Merge branch 'master' of git://git.denx.de/u-boot into resolve

2012-12-10T05:13:27Z

Conflicts: README board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h

x86: video: Add coreboot framebuffer support

2012-11-30T21:44:04Z

Add a basic driver for the coreboot framebuffer. Signed-off-by: Stefan Reinauer Signed-off-by: Simon Glass

tegra: Add LCD driver

2012-11-19T15:15:37Z

This driver supports driving a single LCD and providing a U-Boot console on it. Signed-off-by: Simon Glass Signed-off-by: Tom Warren

drivers: video: Add ld9040 video driver

2012-11-15T12:08:19Z

Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park CC: Donghwa Lee Signed-off-by: Minkyu Kang

video: support exynos pwm backlight driver

2012-09-01T12:58:24Z

This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang