u-boot.git/drivers/video/Makefile, branch v2015.04

ARM: remove jadecpu board support

2015-02-24T22:06:51Z

This is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Matthias Weisser Acked-by: Marek Vasut

x86: Drop the x86_fb driver

2015-01-24T00:24:53Z

Now that we have a full VESA driver we may as well use that. We need to support the VESA layer being set up by early start-up code or by running a VGA ROM. Signed-off-by: Simon Glass

x86: Add a VESA video driver

2015-01-24T00:24:16Z

Add a driver intended to cope with any VESA-compatible x86 graphics adapter. It will not support ROMs which use OpenFirmware (Forth) since there is no support for that in U-Boot. This means that MAC OS cards will not work. Signed-off-by: Simon Glass

video: Add support for Hitachi tx18d42vm LVDS LCD panels

2015-01-22T19:44:33Z

Add support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel. Signed-off-by: Hans de Goede Acked-by: Anatolij Gustschin

video: Add support for SSD2828 (parallel LCD to MIPI bridge)

2015-01-22T11:34:56Z

SSD2828 can take pixel data coming from a parallel LCD interface and translate it on the fly into MIPI DSI interface for driving a MIPI compatible TFT display. SSD2828 is configured over SPI interface, which may or may not have MISO pin wired up on some hardware. So a write-only SPI mode also has to be supported. The SSD2828 support code is implemented as a utility function and needs to be called from real display drivers, which are responsible for driving parallel LCD hardware in front of the video pipeline. The usage instructions are provided as comments in the header file. Signed-off-by: Siarhei Siamashka Acked-by: Anatolij Gustschin Acked-by: Hans de Goede Signed-off-by: Hans de Goede

sunxi: video: Use video-mode/-timing from videomodes

2015-01-14T13:56:38Z

Switch from fb_videomode to ctfb_res_modes and use the predefined videotimings from videomodes.c, rather then defining our own. Signed-off-by: Hans de Goede Acked-by: Ian Campbell Acked-by: Anatolij Gustschin

Merge git://git.denx.de/u-boot-x86

2014-12-01T20:24:07Z

x86: video: Add video driver for bare x86 boards

2014-11-25T14:11:16Z

Add a very simple driver which uses vesa to discover the video mode and then provides a frame buffer for use by U-Boot. Signed-off-by: Simon Glass Acked-by: Anatolij Gustschin

sunxi: video: Add cfb console driver for sunxi

2014-11-25T12:38:46Z

This adds a fixed mode hdmi driver for the sunxi platform. The fixed mode is a relatively safe 1024x768, more complete EDID handling is currently not provided. Only HDMI is supported today. This code is enabled when HPD detects an attached monitor. Current config is such that 8MB is shaved off at the top of the RAM. This avoids several memory handling issues, most significant is the fact that on linux on ARM you are not allowed to remap known RAM as IO. A clued in display driver will be able to recycle this reserved RAM in future though. cfbconsole was chosen as it provides the most important functionality: a working u-boot console, allowing for the debugging of certain issues without the need for a UART. Signed-off-by: Luc Verhaegen [hdegoede@redhat.com: Major cleanups and some small bugfixes] Signed-off-by: Hans de Goede Acked-by: Anatolij Gustschin Acked-by: Ian Campbell

Merge branch 'master' of git://git.denx.de/u-boot-arm

2014-09-12T15:27:46Z