u-boot.git/drivers/video/Makefile, branch v2018.03

video: simplefb

2017-09-12T11:40:47Z

Not really qcom specific, but for now qcom/lk is the one firmware that is (afaiu) setting up the appropriate dt node for pre-configured display. Uses the generic simple-framebuffer DT bindings so this should be useful on other platforms. Signed-off-by: Rob Clark

video: add STM32 LTDC display controller

2017-09-12T11:40:47Z

The STM32 LTDC display controller provides a parallel digital RGB and signals for horizontal, vertical synchronization, Pixel Clock and Data Enable as output to interface directly to a variety of LCD and TFT panels. The LTDC main features are: - 24-bit RGB Parallel Pixel Output, Programmable timings & polarity for HSync, VSync and Data Enable. - 2 layers with Blending, Color Keying, Window position & size, Dithering, Background color, Color Look-Up Table (CLUT). - Supported layer color formats: ARGB8888, RGB888, RGB565, ARGB1555, ARGB4444, L8 CLUT, AL44 & AL88 This LTDC driver: - supports: RGB parallel output with timings & polarity, 1 layer in RGB565. - supports but with hard-coded configurations: blending, window position & size (crop), background color. - does not support yet: rgb888, argb8888, 8-bit clut, dithering. This LTDC driver is compatible with all stm32 platforms with the LTDC IP and has been tested on stm32 f746-disco board. Signed-off-by: Philippe CORNU

dm: backlight: Add a driver for GPIO backlight

2017-09-12T11:40:47Z

Add a driver for GPIO backlights. It understands the standard device tree binding. It can be used with simple-panel when PWM is not necessary. Signed-off-by: Patrick Delaunay

dm: backlight: Add CONFIG_BACKLIGHT_PWM

2017-09-12T11:40:47Z

Add a config to select individually the driver for PWM backlights. Manage "depends on" to be backyard compatible. Signed-off-by: Patrick Delaunay

video: Drop the ct69000 driver

2017-08-07T16:15:19Z

This is not used in U-Boot. Signed-off-by: Bin Meng

video: Drop the sm501 driver

2017-08-07T16:14:36Z

This is not used in U-Boot. Signed-off-by: Bin Meng

video: Drop the sed156x driver

2017-08-07T16:12:23Z

This is not used in U-Boot. Signed-off-by: Bin Meng

video: Drop the l5f31188 driver

2017-08-07T16:10:14Z

This is not used in U-Boot. Signed-off-by: Bin Meng

powerpc, 8xx: remove support for 8xx

2017-06-12T12:37:55Z

There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher

rockchip: video: introduce VIDEO_DW_HDMI and select for Rockchip HDMI

2017-05-15T18:42:56Z

Instead of having drivers/video/rockchip/Kconfig point outside of its hierarchy for dw_hdmi.o, we should use a configuration-option to include the Designware HDMI support. This change introduces a new config option (not to be selected via menuconfig, but to be selected from a dependent video driver's configuration option) that enables dw_hdmi.o and selects it whenever the HDMI support for Rockchip SoCs is selected. Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass