The U_BOOT_DRIVER macro creates a list of drivers used at link time, and
all entries here must be unique. This in turn means that all entries in
the code should also be unique in order to not lead to build failures
later with unexpected build combinations. Typically, the problem we have
here is when a driver is obviously based on another driver and didn't
update this particular field and so while the name field reflects
something unique the linker entry itself is not. In a few places this
provides a more suitable string name as well, however.

Reviewed-by: Marek Vasut <marek.vasut+usb@mailbox.org>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>

A few video drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.

Signed-off-by: Tom Rini <trini@konsulko.com>

Some drivers call video_set_flush_dcache() to indicate that they want to
have the dcache flushed for the frame buffer. These drivers benefit from
our new video damage control, because we can reduce the amount of memory
that gets flushed significantly.

This patch enables video damage control for all device drivers that call
video_set_flush_dcache() to make sure they benefit from it.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
[Alper: Add to VIDEO_TIDSS, imply instead of select]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Add support for Rockchip RK3328 VOP.

Require VOP cleanup before handoff to Linux by writing reset values to
WIN registers. Without this Linux VOP trigger page fault as below
[    0.752016] Loading compiled-in X.509 certificates
[    0.787796] inno_hdmi_phy_rk3328_clk_recalc_rate: parent 24000000
[    0.788391] inno-hdmi-phy ff430000.phy: inno_hdmi_phy_rk3328_clk_recalc_rate rate 148500000 vco 148500000
[    0.798353] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops)
[    0.799403] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator
[    0.800288] rk_iommu ff373f00.iommu: Enable stall request timed out, status: 0x00004b
[    0.801131] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator
[    0.802056] rk_iommu ff373f00.iommu: Disable paging request timed out, status: 0x00004b
[    0.803233] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[    0.805355] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[    0.808769] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops)
[    0.810869] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0

Signed-off-by: Jagan Teki <jagan@edgeble.ai>

Add Rockchip RK3328 HDMI Out driver.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>