u-boot.git/drivers/video, branch v2012.07 Unnamed repository; edit this file 'description' to name the repository. ipu_common: Add ldb_clk for use in parenting the pixel clock 2012-07-10T09:35:39+00:00 Eric Nelson eric.nelson@boundarydevices.com 2012-05-31T07:24:02+00:00 cf65d478ab4e0bb0247c374e6b0b40ef77eddbe8 Add ldb_clk for use in parenting the pixel clock. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Add ldb_clk for use in parenting the pixel clock.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
ipu_common: Do not hardcode the ipu_clk frequency 2012-07-10T09:35:39+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:24:00+00:00 9fbdb1aac5583197270c5d1a7634b7f93b34a654 Do not hardcode the ipu_clk frequency and let the board file pass this value. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Do not hardcode the ipu_clk frequency and let the board file pass this value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
ipu_common: Rename MXC_CCM_BASE 2012-07-10T09:35:39+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:23:59+00:00 477bca22f6bb649fb4c55d3ee401ff0f3c0c0e9e Rename MXC_CCM_BASE to CCM_BASE_ADDR as this is already defined for MX6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Rename MXC_CCM_BASE to CCM_BASE_ADDR as this is already defined for MX6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53 2012-07-10T09:35:39+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:23:58+00:00 e4942ad703d81bc800210de3f4ba27a2f8178eb3 The registers accessed inside clk_ipu_enable/disable are not present on MX6, so make sure they only run on MX51 and MX53. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
The registers accessed inside clk_ipu_enable/disable are not present on MX6,
so make sure they only run on MX51 and MX53.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
ipu_common: Only apply the erratum to MX51 2012-07-10T09:35:38+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:23:57+00:00 913db79427ba6fc71a179a6faff96756ebf40980 The following erratum : "ENGcm08316 IPU: Clarification regarding the bypass mode registers setup for display and camera interfaces" only applies to mx51, so restrict its usage for this SoC only. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
The following erratum :

"ENGcm08316
IPU: Clarification regarding the bypass mode registers setup for
display and camera interfaces"

only applies to mx51, so restrict its usage for this SoC only.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
video: Rename CONFIG_VIDEO_MX5 2012-07-10T09:35:38+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:23:56+00:00 695af9abc660c674966f02b0ecc85f5524a7aede Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
mx6: Allow mx6 to access the IPUv3 registers 2012-07-10T09:35:38+00:00 Fabio Estevam fabio.estevam@freescale.com 2012-05-31T07:23:55+00:00 05d4df1d8a955228968fe9e9382f335950670cdd Adjust the IPUv3 registers, so that the IPUv3 driver can be extended for mx6 as well. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
Adjust the IPUv3 registers, so that the IPUv3 driver can be extended for mx6 as well.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Remove remaining mdelay() macros 2012-07-08T20:15:08+00:00 Anatolij Gustschin agust@denx.de 2012-04-24T22:43:23+00:00 fe749d3728b281cd0b986c82eed30c64b3450ce7 Drop mdelay() macros since we already have a common mdelay() func. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> 
Drop mdelay() macros since we already have a common mdelay() func.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
TRATS: initialize panel_info data structure in board file 2012-07-07T12:07:25+00:00 Donghwa Lee dh09.lee@samsung.com 2012-04-25T13:29:39+00:00 c20545691a3861ece0319cf5ad257714f1b502fd panel_info data structure is gloable variable, so, I have initialized it in board file. If it is initialized in init_panel_info() like existing, it can't be used in drv_lcd_init() in common/lcd.c because init_panel_info() is called after drv_lcd_init(). Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> 
panel_info data structure is gloable variable, so, I have initialized it
in board file. If it is initialized in init_panel_info() like existing,
it can't be used in drv_lcd_init() in common/lcd.c because
init_panel_info() is called after drv_lcd_init().

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
video: atmel/lcd: add LCD driver for new Atmel SoC 2012-06-05T09:19:02+00:00 Bo Shen voice.shen@atmel.com 2012-05-25T00:59:58+00:00 f6b690e65c0aa5f3da22546ac597d9f01cff2e4e The new Atmel SoC (at91sam9x5 series and at91sam9n12) add a totally different LCD controller. Add this new driver to support it. Using CONFIG_ATMEL_HLCD (distinguish with CONFIG_ATMEL_LCD) to enable this in board configuration file. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> 
The new Atmel SoC (at91sam9x5 series and at91sam9n12) add a totally
different LCD controller. Add this new driver to support it.

Using CONFIG_ATMEL_HLCD (distinguish with CONFIG_ATMEL_LCD) to enable
this in board configuration file.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>