u-boot.git/drivers/video, branch v2014.01-rc2

Merge branch 'master' of git://git.denx.de/u-boot-video

2013-12-16T14:56:24Z

Merge branch 'u-boot/master' into 'u-boot-arm/master'

2013-12-10T21:23:59Z

Conflicts: arch/arm/cpu/armv7/rmobile/Makefile doc/README.scrapyard Needed manual fix: arch/arm/cpu/armv7/omap-common/Makefile board/compulab/cm_t335/u-boot.lds

video: ipu_disp: Return a negative value on error

2013-12-04T12:27:55Z

We should return a negative error number (-EINVAL) on error. Signed-off-by: Fabio Estevam

video: remove AT91 legacy API from bus_vcxk

2013-11-13T21:13:10Z

Signed-off-by: Andreas Bießmann Acked-by: Jens Scharsig (BuS Elektronik) Acked-by: Anatolij Gustschin

lcd: add DataImage SCF0403x LCD panel support

2013-11-12T09:08:48Z

Add SPI-based driver for DataImage SCF0403852GGU04 and SCF0403526GGU20 LCD panels. Cc: Tom Rini Cc: Anatolij Gustschin Cc: Igor Grinberg Signed-off-by: Nikita Kiryanov Acked-by: Anatolij Gustschin Signed-off-by: Anatolij Gustschin

video: bcm2835: respect the pitch value

2013-11-12T08:35:40Z

Depending on the firmware's video options [1] the active SDTV or HDTV mode can yield a framebuffer with noncontiguous horizontal lines, giving a messed up display, for both, u-boot and the loaded kernel. Fix this by setting lcd_line_length to the pitch value of the configured framebuffer. [1] http://elinux.org/RPiconfig#Video_mode_options Signed-off-by: Andre Heider Cc: Stephen Warren Signed-off-by: Anatolij Gustschin Acked-by: Stephen Warren

drivers: convert makefiles to Kbuild style

2013-10-31T17:26:01Z

Signed-off-by: Masahiro Yamada

video, formike: change tag/val write

2013-10-30T09:48:41Z

write first the "tag" 8 bit value and then the "val" 8-bit to the display. Tested on the rut board. Signed-off-by: Heiko Schocher Cc: Anatolij Gustschin

video, cfb_console: make background and foreground color configurable

2013-10-30T09:48:37Z

make CONSOLE_BG_COL/CONSOLE_FG_COL configurable through board config file. Clear video screen in video_init(). Signed-off-by: Heiko Schocher Cc: Anatolij Gustschin

video: ipu_disp: Fix clock polarity logic

2013-10-30T09:37:59Z

Currently the HDMI splash screen image quality on mx6solo does not show a very stable image. By comparing the IPU driver from U-boot with the one from FSL 4.1.0 BSP, we can see that there is an inverted logic for setting the DI_GEN_POL_CLK bit. >From FSL BSP [1] we have: if (!sig.clk_pol) di_gen |= DI_GEN_POLARITY_DISP_CLK; Applying the same logic into U-boot fixes the HDMI image stability. [1] git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/mxc/ipu3/ipu_disp.c?h=imx_3.0.35_4.1.0 Signed-off-by: Fabio Estevam Tested-by: Eric Nelson Acked-by: Eric Nelson Acked-by: Stefano Babic