u-boot.git/drivers/video, branch v2018.01-rc3

sunxi: video: HDMI: split VSYNC and HSYNC polarity settings

2017-12-02T16:31:23Z

These are actually different bits, and since some monitors (Benq BL2420PT) have modes with different HSYNC and VSYNC polarity, we should set them independently Tested on Pine64-LTS with Benq BL2420PT monitor. Signed-off-by: Vasily Khoruzhick Reviewed-by: Anatolij Gustschin Acked-by: Maxime Ripard Reviewed-by: Jagan Teki

video: sunxi: de2: add support for LCD SimpleFB

2017-12-02T16:21:54Z

Add support for setting up SimpleFB for LCD display output in DE2 SimpleFB setup code. Signed-off-by: Icenowy Zheng Reviewed-by: Jagan Teki Acked-by: Maxime Ripard

video: sunxi: de2: fix SimpleFB node creation when HDMI not initialized

2017-11-06T08:13:28Z

When HDMI is not initialized (e.g. no monitor is plugged), the current SimpleFB code will still create a broken SimpleFB node. Detect whether HDMI is initialized when creating SimpleFB node. Fixes: be5b96f0e411 ("sunxi: setup simplefb for Allwinner DE2") Signed-off-by: Icenowy Zheng Reviewed-by: Jagan Teki Acked-by: Maxime Ripard

exynos: video: fix typo in DisplayPort driver

2017-10-29T13:33:55Z

Signed-off-by: Dongjin Kim CC: Simon Glass CC: Minkyu Kang

video/da8xx-fb: Cache-align memory allocations

2017-10-29T13:33:24Z

Resort to malloc_cache_aligned() rather than malloc() which also removes 'CACHE: Misaligned operation at range' warnings. Signed-off-by: Niko Mauno

sunxi: video: add LCD support to DE2 driver

2017-10-27T07:44:48Z

Extend DE2 driver with LCD support. Tested on Pinebook which is based on A64 and has ANX6345 eDP bridge with eDP panel connected to it. Signed-off-by: Vasily Khoruzhick [agust: rebased v5 on u-boot-video/master] Signed-off-by: Anatolij Gustschin

sunxi: video: split out PLL configuration code

2017-10-27T07:39:19Z

It will be reused in new DM LCD driver. Signed-off-by: Vasily Khoruzhick

video: add anx6345 DM driver

2017-10-26T13:43:11Z

This is a eDP bridge similar to ANX9804, it allows to connect eDP panels to the chips that can output only parallel signal Signed-off-by: Vasily Khoruzhick [agust: fixed most checkpatch errors/warnings] Signed-off-by: Anatolij Gustschin

video: anx9804: split out registers definitions into a separate header

2017-10-26T12:31:42Z

This header will be used in anx6345 driver Signed-off-by: Vasily Khoruzhick [agust: moved header to drivers/video] Signed-off-by: Anatolij Gustschin

dm: video: bridge: add operation to read EDID

2017-10-26T12:17:01Z

Add an operation to read EDID, since bridge may have ability to read EDID from the panel that is connected to it, for example LCD<->eDP bridge. Signed-off-by: Vasily Khoruzhick