u-boot.git/drivers, branch v2009.03 Unnamed repository; edit this file 'description' to name the repository. Replaced endpoint numbers with appropriate macros in usbtty.c. 2009-03-21T09:40:24+00:00 Vivek Kutal vivek.kutal@azingo.com 2009-02-23T16:05:11+00:00 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5 Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com> Signed-off-by: Remy Bohmer <linux@bohmer.net> 
Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
net: sh_eth: Remove sh_eth_reset() from halt function 2009-03-20T21:16:36+00:00 Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com 2009-03-18T03:27:04+00:00 40281a9ca21a6b6d7b996b4d4eeaa19026337231 sh_eth_reset is function to reset Ether IP. The MAC address is stored in IP, but it is initialized by this function. OS (e.g. Linux Kernel) can not use this device when initialized. This revises this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> 
sh_eth_reset is function to reset Ether IP.
The MAC address is stored in IP, but it is initialized by this function.
OS (e.g. Linux Kernel) can not use this device when initialized.
This revises this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
CFI: geometry reversal for STMicro M29W320DT 2009-03-19T14:00:32+00:00 Richard Retanubun RichardRetanubun@RuggedCom.com 2009-03-06T15:09:37+00:00 7a88601a34132548c3c591ea87ab3468b51121b0 Follow up to the flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Stefan Roese <sr@denx.de> 
Follow up to the flash_fixup_stm to fix geometry reversal
on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
8xx: add support for new keymile kmsupx4 board. 2009-03-18T19:50:05+00:00 Heiko Schocher hs@denx.de 2009-03-12T06:37:34+00:00 1b6275dfb173bd2edb8f208dd050d6f47ae39654 This patch adds support for the kmsupx4 board from Keymile, based on a Freescale MPC852T CPU - serial console on SMC1 - 32 MB SDRAM - 32 MB NOR Flash - Ethernet over SCC3 - I2C Bitbang Signed-off-by: Heiko Schocher <hs@denx.de> 
This patch adds support for the kmsupx4 board from Keymile,
based on a Freescale MPC852T CPU

- serial console on SMC1
- 32 MB SDRAM
- 32 MB NOR Flash
- Ethernet over SCC3
- I2C Bitbang

Signed-off-by: Heiko Schocher <hs@denx.de>
Merge branch 'master' of git://git.denx.de/u-boot-sh 2009-03-15T21:15:13+00:00 Wolfgang Denk wd@denx.de 2009-03-15T21:15:13+00:00 e05825324a8a7679b87db550a0d7ade06c890494 






MPC5200 FEC MII speed register
2009-03-13T15:58:37+00:00

Jon Smirl
jonsmirl@gmail.com

2009-03-11T19:08:56+00:00

f949bd8d089ec3059c460ac829c0d919e1d7af0e

Set a non-zero speed in the MII register so that MII commands will work.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>





Set a non-zero speed in the MII register so that MII commands will work.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>







sh: Add some register value configurable to PCI of SH7780
2009-03-12T14:58:30+00:00

Yoshihiro Shimoda
shimoda.yoshihiro@renesas.com

2009-02-25T05:26:42+00:00

06b18163b57e6b0349b0c299222d50e7b1e41e50

Some register value was hardcoded for System memory size 128MB and
memory offset 0x08000000. This patch fixed the problem.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>





Some register value was hardcoded for System memory size 128MB and
memory offset 0x08000000. This patch fixed the problem.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>







sh: Add system memory registration to PCI for SH4
2009-03-12T14:58:30+00:00

Yoshihiro Shimoda
shimoda.yoshihiro@renesas.com

2009-02-25T05:26:52+00:00

06e2735eb85cbea7cecb3c308d6d078b3651b22c

It is necessary for some pci device driver.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>





It is necessary for some pci device driver.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>







tsec: report when there is no vendor specific PHY support
2009-03-09T23:08:04+00:00

Paul Gortmaker
paul.gortmaker@windriver.com

2009-03-09T23:07:53+00:00

0452352df118bc9dd684a056aaaa5fb4aed1178a

Commit af1c2b84 added a generic phy support, with an ID of zero
and a 32 bit mask; meaning that it will match on any PHY ID.

The problem is that there is a test that checked if a matching
PHY was found, and if not, it printed the non-matching ID.
But since there will always be a match (on the generic PHY,
worst case), this test will never trip.

In the case of a misconfigured PHY address, or of a PHY that
isn't explicitly supported outside of the generic support,
you will never see the ID of 0xffffffff, or the ID of the
real (but unsupported) chip.  It will silently fall through
onto the generic support.

This change makes that test useful again, and ensures that
the selection of generic PHY support doesn't happen without
some sort of notice.  It also makes it explicitly clear that
the generic PHY must be last in the PHY table.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andy Fleming <afleming@freescale.com>





Commit af1c2b84 added a generic phy support, with an ID of zero
and a 32 bit mask; meaning that it will match on any PHY ID.

The problem is that there is a test that checked if a matching
PHY was found, and if not, it printed the non-matching ID.
But since there will always be a match (on the generic PHY,
worst case), this test will never trip.

In the case of a misconfigured PHY address, or of a PHY that
isn't explicitly supported outside of the generic support,
you will never see the ID of 0xffffffff, or the ID of the
real (but unsupported) chip.  It will silently fall through
onto the generic support.

This change makes that test useful again, and ensures that
the selection of generic PHY support doesn't happen without
some sort of notice.  It also makes it explicitly clear that
the generic PHY must be last in the PHY table.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andy Fleming <afleming@freescale.com>







Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
2009-03-08T23:41:48+00:00

Wolfgang Denk
wd@denx.de

2009-03-08T23:41:48+00:00

014c595f12d4f7e14cb10188f856465b2d41718f

Conflicts:
	lib_ppc/board.c

Signed-off-by: Wolfgang Denk <wd@denx.de>





Conflicts:
	lib_ppc/board.c

Signed-off-by: Wolfgang Denk <wd@denx.de>