u-boot.git/drivers, branch v2014.10 Unnamed repository; edit this file 'description' to name the repository. sunxi: axp152: dcdc3 scale is 50mV / step not 25mV / step 2014-10-13T13:02:01+00:00 Hans de Goede hdegoede@redhat.com 2014-10-13T12:51:40+00:00 74bf7961a0af0b725d7f0376422d0bdd5bd3c707 Currently uboot wrongly uses 25mV / step for dcdc3, this is a copy and paste error introduced when adding the axp152_mvolt_to_target during review of the axp152.c driver. This results in u-boot setting Vddr to 2.3V instead of 1.5V. This commit fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 
Currently uboot wrongly uses 25mV / step for dcdc3, this is a copy and paste
error introduced when adding the axp152_mvolt_to_target during review of the
axp152.c driver. This results in u-boot setting Vddr to 2.3V instead of 1.5V.

This commit fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-10-11T00:59:28+00:00 Tom Rini trini@ti.com 2014-10-11T00:59:28+00:00 e89d623f099c44b0b166ccf46bce2e6a0b99c984 






Merge branch 'u-boot/master' into 'u-boot-arm/master'
2014-10-10T23:20:30+00:00

Albert ARIBAUD
albert.u.boot@aribaud.net

2014-10-10T23:20:30+00:00

790af815436bc6a93e4c581840be2419897f23b1












macb: simplify gmac initialisation
2014-10-10T19:51:15+00:00

Andreas Bießmann
andreas.devel@googlemail.com

2014-09-18T21:46:48+00:00

476095772f3aa58ee581943e4e993d9b8a61239c

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Bo Shen <voice.shen@atmel.com>





Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Bo Shen <voice.shen@atmel.com>







serial-uclass: Fix compilation error
2014-10-10T16:37:59+00:00

Hans de Goede
hdegoede@redhat.com

2014-10-10T16:30:17+00:00

4a74298c54272f1b0397826072c193158d3e7f14

Signed-off-by: Hans de Goede <hdegoede@redhat.com>





Signed-off-by: Hans de Goede <hdegoede@redhat.com>







Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2014-10-10T13:45:16+00:00

Tom Rini
trini@ti.com

2014-10-10T13:45:16+00:00

db67801bf92f7fae6131dbc0d387131698fb9490












ahci: Don't start command DMA engine before buffers are set
2014-10-10T13:44:41+00:00

Roger Quadros
rogerq@ti.com

2014-09-23T15:07:01+00:00

02590aa31cc282cffafac559032981094f716fa9

The DMA/FIS buffers are set in ahci_port_start() which is called
after ahci_host_init(). So don't start the DMA engine here
(i.e. don't set FIS_RX)

This fixes the following error at kernel boot on OMAP platforms (e.g. DRA7x)
WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x358()
44000000.ocp:L3 Custom Error: MASTER SATA TARGET GPMC (Idle): Data Access in User mode during Functional access

Signed-off-by: Roger Quadros <rogerq@ti.com>





The DMA/FIS buffers are set in ahci_port_start() which is called
after ahci_host_init(). So don't start the DMA engine here
(i.e. don't set FIS_RX)

This fixes the following error at kernel boot on OMAP platforms (e.g. DRA7x)
WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x358()
44000000.ocp:L3 Custom Error: MASTER SATA TARGET GPMC (Idle): Data Access in User mode during Functional access

Signed-off-by: Roger Quadros <rogerq@ti.com>







Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
2014-10-10T06:56:01+00:00

Albert ARIBAUD
albert.u.boot@aribaud.net

2014-10-10T06:56:01+00:00

ebf8644a113a36b163c2e06fe1e081c73f563c3a












mtd: denali: support NAND_CMD_RNDOUT command
2014-10-09T22:33:26+00:00

Masahiro Yamada
yamada.m@jp.panasonic.com

2014-10-03T11:03:04+00:00

ed3c980bee74dc1bd599dd44b41b2c32ee78c0a8

The function nand_flash_detect_ext_param_page() requires
NAND_CMD_RNDOUT command supported.  It is necessary to detect some
types of ONFi-compliant devices.  Without it, the error message
"unsupported command received 0x5" is shown.

Let's support this command on the Denali NAND controller driver.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Chin Liang See <clsee@altera.com>





The function nand_flash_detect_ext_param_page() requires
NAND_CMD_RNDOUT command supported.  It is necessary to detect some
types of ONFi-compliant devices.  Without it, the error message
"unsupported command received 0x5" is shown.

Let's support this command on the Denali NAND controller driver.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Chin Liang See <clsee@altera.com>







mtd: denali: fix NAND_CMD_PARAM command
2014-10-09T22:33:24+00:00

Masahiro Yamada
yamada.m@jp.panasonic.com

2014-10-03T11:03:03+00:00

05968e7cfd5dcc50cfe51d03d119a5e9d77bd07c

NAND_CMD_PARAM (0xEC) command is not working on the Denali
NAND controller driver.

Unlike NAND_CMD_READID (0x90), when the NAND_CMD_PARAM command
is followed by an address cycle, the target device goes busy.
(R/B# is deasserted)
Wait until the parameter data are ready.

In addition, unnecessary clear_interrupts() should be removed.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Chin Liang See <clsee@altera.com>





NAND_CMD_PARAM (0xEC) command is not working on the Denali
NAND controller driver.

Unlike NAND_CMD_READID (0x90), when the NAND_CMD_PARAM command
is followed by an address cycle, the target device goes busy.
(R/B# is deasserted)
Wait until the parameter data are ready.

In addition, unnecessary clear_interrupts() should be removed.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Chin Liang See <clsee@altera.com>