u-boot.git/drivers, branch v2016.09-rc2 Unnamed repository; edit this file 'description' to name the repository. Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2016-08-20T20:40:34+00:00 Tom Rini trini@konsulko.com 2016-08-20T15:35:28+00:00 c98b171e1098f94b2ff7720c45a25a602882f876 [trini: Drop CMD_BOOTI as it's now on by default on ARM64] Signed-off-by: Tom Rini <trini@konsulko.com> 
[trini: Drop CMD_BOOTI as it's now on by default on ARM64]
Signed-off-by: Tom Rini <trini@konsulko.com>
pinctrl: fix typos in comment blocks of pinconfig_post_bind() 2016-08-20T18:03:28+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2016-08-19T09:26:54+00:00 f835706c2957a4c77fc0c6fece9f38a6587b4cad '-' is never used in function names. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
'-' is never used in function names.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
fastboot: implement Kconfig 2016-08-20T18:03:23+00:00 Steve Rae steve.rae@raedomain.com 2016-08-16T00:26:26+00:00 e016f0b2c2e1dc6287b205905ff232c32f8c9e92 implement Kconfig for the 'fastboot' feature set Signed-off-by: Steve Rae <steve.rae@raedomain.com> 
implement Kconfig for the 'fastboot' feature set

Signed-off-by: Steve Rae <steve.rae@raedomain.com>
arm: rmobile: Add BLANCHE board support 2016-08-17T01:25:35+00:00 masakazu.mochizuki.wd@hitachi.com masakazu.mochizuki.wd@hitachi.com 2016-04-12T08:11:41+00:00 6f107e4cf6f9c7beddad5878e83436823bff3fa8 BLANCHE is development board based on R-Car V2H SoC (R8A7792) This commit supports the following periherals: - SCIF, Ethernet, QSPI, MMC Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 
BLANCHE is development board based on R-Car V2H SoC (R8A7792)

This commit supports the following periherals:
- SCIF, Ethernet, QSPI, MMC

Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
mmc: rmobile: add a compiler barrier 2016-08-17T01:25:35+00:00 Yannick Gicquel yannick.gicquel@iot.bzh 2016-04-04T09:49:59+00:00 759319468505f4b6179c5fc4e3a682f2b2f44b3c Building w/ GCC v5.2, the SD card access is broken due to invalid data in the response command reconstructed at the end of sh_sdhci_get_response(). Add a memory barrier between the two main steps of this function to ensure the resp[] table content is consistent before bits reordering. This fix has been tested Ok on Porter board rev1.0 using v2016.03 release. Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh> 
Building w/ GCC v5.2, the SD card access is broken due to invalid data
in the response command reconstructed at the end of
sh_sdhci_get_response().

Add a memory barrier between the two main steps of this function to
ensure the resp[] table content is consistent before bits reordering.

This fix has been tested Ok on Porter board rev1.0 using v2016.03
release.

Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
serial: sh: Add support R8A7795 2016-08-17T01:25:34+00:00 Hiroyuki Yokoyama hiroyuki.yokoyama.vx@renesas.com 2016-03-31T18:51:31+00:00 d6ee8ce51de612d68d389619dfd0471292bf9add This can be used in the same way as other R-CAR serial setting. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 
This can be used in the same way as other R-CAR serial setting.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE 2016-08-17T01:25:34+00:00 Nobuhiro Iwamatsu iwamatsu@nigauri.org 2015-10-09T20:58:28+00:00 1cc95f6e1b38e96dfbb5ffb9aec211b1d0a88135 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-08-16T11:58:41+00:00 Tom Rini trini@konsulko.com 2016-08-16T11:58:41+00:00 793fd86f722f5c5e13290be2074816b001359b76 






i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)
2016-08-16T03:44:09+00:00

Stefan Roese
sr@denx.de

2016-08-09T05:41:15+00:00

ca6c5e03f132e9042c27472650184be9e8263508

This patch adds support for the SMBus block read/write functionality.
Other protocols like the SMBus quick command need to get added
if this is needed.

This patch also removed the SMBus related defines from the Ivybridge
pch.h header. As they are integrated in this driver and should be
used from here. This change is added in this patch to avoid compile
breakage to keep the source git bisectable.

Tested on a congatec BayTrail board to configure the SMSC2513 USB
hub.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>





This patch adds support for the SMBus block read/write functionality.
Other protocols like the SMBus quick command need to get added
if this is needed.

This patch also removed the SMBus related defines from the Ivybridge
pch.h header. As they are integrated in this driver and should be
used from here. This change is added in this patch to avoid compile
breakage to keep the source git bisectable.

Tested on a congatec BayTrail board to configure the SMSC2513 USB
hub.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>







misc: Add simple driver for some Nuvoton NCT6102D devices
2016-08-16T03:44:09+00:00

Stefan Roese
sr@denx.de

2016-07-19T05:45:46+00:00

4cf9e464f78e58117b9a57e1e4e092e609d96b59

This simple driver provides some functions to control some of the
integrated devices. The watchdog is enabled per default. This driver
adds a function to disable the watchdog. Also the internal legacy
UART (io address 0x3f8/0x2f8) is enabled per default.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>





This simple driver provides some functions to control some of the
integrated devices. The watchdog is enabled per default. This driver
adds a function to disable the watchdog. Also the internal legacy
UART (io address 0x3f8/0x2f8) is enabled per default.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>