u-boot.git/drivers, branch v2016.11 Unnamed repository; edit this file 'description' to name the repository. video: bmp: Fix compilation errors with CONFIG_BMP_xxBPP enabled 2016-11-13T20:54:38+00:00 Stefan Roese sr@denx.de 2016-11-12T09:32:38+00:00 22bb1a7a1bbf0796185306bca95b94bdaa039ca3 Compiling the 'bmp' command with DM and having one of the following macros enabled: CONFIG_BMP_16BPP, CONFIG_BMP_24BPP ONFIG_BMP_32BPP generates this error: drivers/video/video_bmp.c: In function ‘video_bmp_display’: drivers/video/video_bmp.c:315:22: error: ‘lcd_line_length’ undeclared (first use in this function) fb -= width * 2 + lcd_line_length; ^ This patch moves to using the correct variable instead and enables the 'bmp' command for DM again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> 
Compiling the 'bmp' command with DM and having one of the following macros
enabled:

CONFIG_BMP_16BPP, CONFIG_BMP_24BPP ONFIG_BMP_32BPP

generates this error:

drivers/video/video_bmp.c: In function ‘video_bmp_display’:
drivers/video/video_bmp.c:315:22: error: ‘lcd_line_length’ undeclared (first use in this function)
    fb -= width * 2 + lcd_line_length;
                          ^

This patch moves to using the correct variable instead and enables the
'bmp' command for DM again.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
spi: ti_qspi: Fix baudrate divider calculation 2016-11-13T20:54:37+00:00 Vignesh R vigneshr@ti.com 2016-11-05T10:35:16+00:00 948b8bbd5fc4722ec10e0ffde29d31d982f6a6e4 Fix the divider calculation logic to choose a value so that the resulting baudrate is either equal to or closest possible baudrate less than the requested value. While at that, cleanup ti_spi_set_speed(). Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com> 
Fix the divider calculation logic to choose a value so that the
resulting baudrate is either equal to or closest possible baudrate less
than the requested value. While at that, cleanup ti_spi_set_speed().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
net: mvgbe: Fix build error with CONFIG_PHYLIB 2016-11-07T17:28:16+00:00 Chris Packham judge.packham@gmail.com 2016-10-31T21:48:32+00:00 6ecf9e21b5ecd5ddfe9100cb1023ca244fe63ceb Commit 5a49f17481bb ("net: mii: Use spatch to update miiphy_register") updated the mvgbe implementation of smi_reg_read/smi_reg_write. Prior to that change mvgbe_phy_read and mvgbe_phy_write where used as wrappers to satisfy the phylib APIs. Because these functions weren't updated in that commit build errors where triggered when CONFIG_PHYLIB was enabled. Fix these build errors by removing mvgbe_phy_read and mvgbe_phy_write and using smi_reg_read/smi_reg_write directly. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Commit 5a49f17481bb ("net: mii: Use spatch to update miiphy_register")
updated the mvgbe implementation of smi_reg_read/smi_reg_write. Prior to
that change mvgbe_phy_read and mvgbe_phy_write where used as wrappers to
satisfy the phylib APIs. Because these functions weren't updated in that
commit build errors where triggered when CONFIG_PHYLIB was enabled.

Fix these build errors by removing mvgbe_phy_read and mvgbe_phy_write
and using smi_reg_read/smi_reg_write directly.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net: phy: micrel: center FLP burst timing at 16ms 2016-11-07T17:28:16+00:00 Ash Charles ashcharles@gmail.com 2016-10-21T21:31:33+00:00 f018545ef756c4bc567d1bbf153615833bc590b0 Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms specified by the IEEE802.3 standard from the chip's default of 8ms. For more details, see the "Auto-Negotiation Timing" section of the KSZ9031RNX datasheet. [1] https://patchwork.kernel.org/patch/6558371/ Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms
specified by the IEEE802.3 standard from the chip's default of 8ms.

For more details, see the "Auto-Negotiation Timing" section of the
KSZ9031RNX datasheet.

[1] https://patchwork.kernel.org/patch/6558371/

Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net: add driver for Synopsys Ethernet QoS device 2016-11-07T17:28:15+00:00 Stephen Warren swarren@nvidia.com 2016-10-21T20:46:47+00:00 ba4dfef1469f13b0189845b778228590391706b3 This driver supports the Synopsys Designware Ethernet QoS (Quality of Service) a/k/a eqos IP block, which is a different design than the HW supported by the existing designware.c driver. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily, as explained in the source. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # V1 Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
This driver supports the Synopsys Designware Ethernet QoS (Quality of
Service) a/k/a eqos IP block, which is a different design than the HW
supported by the existing designware.c driver. The IP supports many
options for bus type, clocking/reset structure, and feature list. This
driver currently supports the specific configuration used in NVIDIA's
Tegra186 chip, but should be extensible to other combinations quite
easily, as explained in the source.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # V1
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Merge branch 'master' of git://git.denx.de/u-boot-usb 2016-11-03T11:09:42+00:00 Tom Rini trini@konsulko.com 2016-11-03T11:09:42+00:00 eef55e5fcaacf874e2773127fb6660fcaabc7c35 






dfu: align array in dfu_get_dev_type with enum dfu_device_type
2016-11-03T10:55:25+00:00

Patrick Delaunay
patrick.delaunay73@gmail.com

2016-10-28T07:44:26+00:00

dd93a8e9e688f4c448092a275bf7db3e16d21c6f

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>





Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>







Merge git://git.denx.de/u-boot-rockchip
2016-11-02T13:41:20+00:00

Tom Rini
trini@konsulko.com

2016-11-02T13:41:20+00:00

7fd117389ec7bbd0ce2fbb98ce47c20f5b8a0cfb












Fix spelling of "resetting".
2016-10-31T14:13:17+00:00

Vagrant Cascadian
vagrant@debian.org

2016-10-24T03:45:19+00:00

3450a8596d3c06107ccf44d2ad41402449e681dd

Cover-Letter: Fixes several spelling errors for the words "resetting",
  "extended", "occur", and "multiple".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>





Cover-Letter: Fixes several spelling errors for the words "resetting",
  "extended", "occur", and "multiple".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>







rockchip: rk3288: Move rockchip_get_cru() out of the driver
2016-10-30T19:29:06+00:00

Simon Glass
sjg@chromium.org

2016-10-02T02:04:52+00:00

5564ed5dd980c1e67780fb6a7fdbe29fd76174ed

This function is called from outside the driver. It should be placed into
common SoC code. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>





This function is called from outside the driver. It should be placed into
common SoC code. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>