u-boot.git/drivers, branch v2017.03-rc1

i2c: uniphier-f: use readl_poll_timeout() to poll registers

2017-01-29T11:59:08Z

The readl_poll_timeout() is a useful helper to poll registers and error out if the condition is not met. Signed-off-by: Masahiro Yamada

i2c: uniphier(-f): remove unneeded #include

2017-01-29T11:59:08Z

This include is unnecessary for low-level drivers. Signed-off-by: Masahiro Yamada

clk: uniphier: fix compatible strings for Pro5, PXs2, LD20 SD clock

2017-01-29T11:59:08Z

I missed to update them when DT files were resynced with Linux. Signed-off-by: Masahiro Yamada

ARM: SPI: stm32: add stm32f746 qspi driver

2017-01-28T19:04:50Z

This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz

net: phy: add SMSC LAN8742 phy

2017-01-28T19:04:47Z

This patch adds support for SMSC LAN8742 in phylib Signed-off-by: Michael Kurz Acked-by: Joe Hershberger

net: stm32: add designware mac glue code for stm32

2017-01-28T19:04:47Z

This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz Acked-by: Joe Hershberger

aspeed: Add basic ast2500-specific drivers and configuration

2017-01-28T19:04:29Z

Clock Driver This driver is ast2500-specific and is not compatible with earlier versions of this chip. The differences are not that big, but they are in somewhat random places, so making it compatible with ast2400 is not worth the effort at the moment. SDRAM MC driver The driver is very ast2500-specific and is completely incompatible with previous versions of the chip. The memory controller is very poorly documented by Aspeed in the datasheet, with any mention of the whole range of registers missing. The initialization procedure has been basically taken from Aspeed SDK, where it is implemented in assembly. Here it is rewritten in C, with very limited understanding of what exactly it is doing. Reviewed-by: Simon Glass

aspeed: Add drivers common to all Aspeed SoCs

2017-01-28T19:04:27Z

Add support for Watchdog Timer, which is compatible with AST2400 and AST2500 watchdogs. There is no uclass for Watchdog yet, so the driver does not follow the driver model. It also uses fixed clock, so no clock driver is needed. Add support for timer for Aspeed ast2400/ast2500 devices. The driver actually controls several devices, but because all devices share the same Control Register, it is somewhat difficult to completely decouple them. Since only one timer is needed at the moment, this should be OK. The timer uses fixed clock, so does not rely on a clock driver. Add sysreset driver, which uses watchdog timer to do resets and particular watchdog device to use is hardcoded (0) Reviewed-by: Simon Glass

Merge git://www.denx.de/git/u-boot-marvell

2017-01-26T17:26:24Z

Merge git://git.denx.de/u-boot-mpc85xx

2017-01-25T22:38:45Z