u-boot.git/drivers, branch v2017.09-rc4

crypto/fsl: fix obj-yy in Makefile

2017-09-04T13:02:07+00:00

When enabling CONFIG_CMD_BLOB and/or CONFIG_CMD_DEKBLOB, the build fails
with a linker error:
  ...
  LD      u-boot
arch/arm/mach-imx/built-in.o: In function `blob_encap_dek':
/home/clemens/dev/u-boot/arch/arm/mach-imx/cmd_dek.c:46: undefined
reference to `blob_dek'

This is due to an error in the Makefile, resulting in obj-yy/obj-yn/..
and fsl_blob.o is therefore not linked.

Fix it by splitting it up into two obj-y lines.

Signed-off-by: Clemens Gruber 
Reviewed-by: Fabio Estevam

block: Drop the ftide020 driver

2017-09-03T19:30:35+00:00

This is not used in U-Boot.

Signed-off-by: Bin Meng

block: ide: Drop CONFIG_IDE_LED

2017-09-03T19:30:35+00:00

This is actually not used. Drop it.

Signed-off-by: Bin Meng

block: ide: Drop CONFIG_IDE_INIT_POSTRESET

2017-09-03T19:30:34+00:00

This is not referenced anywhere. Drop it.

Signed-off-by: Bin Meng

nvme: Remove dead codes in nvme_setup_io_queues()

2017-09-03T19:30:34+00:00

Execution cannot reach this statement: "nr_io_queues = result;"

Reported-by: Coverity (CID: 166731)
Signed-off-by: Bin Meng 
Reviewed-by: Tom Rini

nvme: Fix potential sign extension issue in nvme_blk_rw()

2017-09-03T19:30:33+00:00

"lbas" with type "u16" (16 bits, unsigned) is promoted in
"lbas << ns->lba_shift" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long long" (64 bits, unsigned).
If "lbas << ns->lba_shift" is greater than 0x7FFFFFFF, the upper
bits of the result will all be 1.

Fix it by casting "lbas" to "u32".

Reported-by: Coverity (CID: 166730)
Signed-off-by: Bin Meng 
Reviewed-by: Tom Rini

nvme: Fix wrong ndev->queues memset

2017-09-03T19:30:32+00:00

memset() was given a sizeof(NVME_Q_NUM * sizeof(struct nvme_queue *)
to clear, which is wrong.

Reported-by: Coverity (CID: 166729)
Signed-off-by: Bin Meng 
Reviewed-by: Tom Rini

Merge git://git.denx.de/u-boot-x86

2017-09-03T00:50:59+00:00

Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set

2017-09-02T19:50:30+00:00

Add the following options to drivers/misc/Kconfig:
	SYS_I2C_EEPROM_ADDR
	SYS_I2C_EEPROM_BUS
	SYS_EEPROM_SIZE
	SYS_EEPROM_PAGE_WRITE_BITS
	SYS_EEPROM_PAGE_WRITE_DELAY_MS
	SYS_I2C_EEPROM_ADDR_LEN
	SYS_I2C_EEPROM_ADDR_OVERFLOW

This does not migrate any boards, but provides a foundations for
those who want/need these options

Signed-off-by: Adam Ford 
[trini: Migrate uniphier]
Signed-off-by: Tom Rini

x86: ich-spi: Clear atomic preop only when SPI settings are not locked

2017-09-02T15:35:55+00:00

The atomic preop register can only be written when SPI settings are
not locked, otherwise it's read-only.

Signed-off-by: Bin Meng 
Reviewed-by: Stefan Roese