u-boot.git/drivers, branch v2019.07 Unnamed repository; edit this file 'description' to name the repository. Merge tag 'video-for-2019.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-video 2019-07-07T20:17:13+00:00 Tom Rini trini@konsulko.com 2019-07-07T20:17:13+00:00 29e9363504d6e2aef0bd11a08de59cf635e285bc - fix pwm backlight 
- fix pwm backlight
video: backlight: fix pwm inversion 2019-07-06T21:31:52+00:00 Marc Dietrich marvin24@gmx.de 2019-07-02T20:08:33+00:00 a2c4ef097774e70f0afc4ab25f53b769c6da3397 set_pwm() will always fail with -ENOSYS if pwm_ops set_invert() is not implemented, leaving the backlight dark. Fix this by returning no error if set_invert() is not implemented and no polarity change is requested. Fixes: 57e7775413 ("video: backlight: Parse PWM polarity cell") Signed-off-by: Marc Dietrich <marvin24@gmx.de> 
set_pwm() will always fail with -ENOSYS if pwm_ops set_invert() is
not implemented, leaving the backlight dark. Fix this by returning
no error if set_invert() is not implemented and no polarity change
is requested.

Fixes: 57e7775413 ("video: backlight: Parse PWM polarity cell")
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glue 2019-07-05T12:19:41+00:00 Jean-Jacques Hiblot jjhiblot@ti.com 2019-07-05T07:33:58+00:00 3b83829ed63fabe460592395571c1d8fd9b861c8 dwc3-generic has been broken since MISC uclass has been modified to scan DT sub-nodes after bind. Fixing it by a using the no-op uclass. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
dwc3-generic has been broken since MISC uclass has been modified to scan DT
sub-nodes after bind.
Fixing it by a using the no-op uclass.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: Add a No-op uclass 2019-07-05T12:19:41+00:00 Jean-Jacques Hiblot jjhiblot@ti.com 2019-07-05T07:33:57+00:00 07e33711fec4f1106f36805b5dc830da07c783c5 This uclass is intended for devices that do not need any features from the uclass, including binding children. This will typically be used by devices that are used to bind child devices but do not use dm_scan_fdt_dev() to do it. That is for example the case of several USB wrappers that have 2 child devices (1 for device and 1 for host) but bind only one at a any given time. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
This uclass is intended for devices that do not need any features from the
uclass, including binding children.
This will typically be used by devices that are used to bind child devices
but do not use dm_scan_fdt_dev() to do it. That is for example the case of
several USB wrappers that have 2 child devices (1 for device and 1 for
host) but bind only one at a any given time.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callback 2019-07-05T12:19:40+00:00 Jean-Jacques Hiblot jjhiblot@ti.com 2019-07-05T07:33:56+00:00 e445d46651de61fdfecf34cc2cd97d58ca6c5cf3 There is simply no reason to do that here. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> 
There is simply no reason to do that here.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
usb: ehci-mx6: Fix bus enumeration for DM case 2019-07-05T12:19:40+00:00 Marek Vasut marex@denx.de 2019-06-24T17:05:47+00:00 501547cec1f7f0438cae388a104ff60f18576c01 The EHCI iMX6 driver is only partly converted to DT probing and still uses a tremendous amount of hard-coded addresses. Worse, the driver uses hard-coded SoC-model-specific base addresses, which are derived from values protected by SoC-specific macros, hence the driver is also compiled for a specific SoC model. Even worse, the driver depends on specific sequential indexing of the controllers, from which it derives offsets in the PHY and ANATOP register sets. However, when the driver is probed from DT, the indexing is not correct. In fact, each controller has index 0. This patch derives the index for DT probing case from the controller base addresses, which is not the way this should be done, however it is the least intrusive approach, favorable this close to release. The necessary steps to convert this driver fully to DT probing are described inside the patch, however this should be done in the next release and depends on iMX clock driver patches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Adam Ford <aford173@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org> 
The EHCI iMX6 driver is only partly converted to DT probing and
still uses a tremendous amount of hard-coded addresses. Worse,
the driver uses hard-coded SoC-model-specific base addresses, which
are derived from values protected by SoC-specific macros, hence the
driver is also compiled for a specific SoC model. Even worse, the
driver depends on specific sequential indexing of the controllers,
from which it derives offsets in the PHY and ANATOP register sets.

However, when the driver is probed from DT, the indexing is not
correct. In fact, each controller has index 0. This patch derives
the index for DT probing case from the controller base addresses,
which is not the way this should be done, however it is the least
intrusive approach, favorable this close to release.

The necessary steps to convert this driver fully to DT probing are
described inside the patch, however this should be done in the next
release and depends on iMX clock driver patches.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
pinctrl: uniphier: Add SPI pin-mux settings 2019-06-29T13:21:26+00:00 Kunihiko Hayashi hayashi.kunihiko@socionext.com 2019-06-11T01:06:13+00:00 d5381853ad557d036c4d5d014d4a2e2837c5643e Add pin-mux settings for SPI controller. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
Add pin-mux settings for SPI controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2019-06-28T12:00:22+00:00 Tom Rini trini@konsulko.com 2019-06-28T12:00:22+00:00 0352e878d2b80b2575e02310e891e936251b3992 Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board 
Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP 2019-06-27T11:50:28+00:00 Frieder Schrempf frieder.schrempf@kontron.de 2019-06-04T19:56:29+00:00 2c72ead7387404eba16c556d2f204c52c36c27f9 Add support for loading u-boot FIT images over the USB SDP protocol in the SPL Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> [Various build fixes] Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Fabio Estevam <festevam@gmail.com> Tested-by: Lukasz Majewski <lukma@denx.de> 
Add support for loading u-boot FIT images over the USB SDP protocol in
the SPL

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
[Various build fixes]
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Lukasz Majewski <lukma@denx.de>
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 2019-06-22T16:09:33+00:00 Tom Rini trini@konsulko.com 2019-06-22T16:09:33+00:00 5eea874b5e989e62519824ad140aa086432d01ee - boot failure fix for Intel edison - tangier wdt conversion to driver model 
- boot failure fix for Intel edison
- tangier wdt conversion to driver model