u-boot.git/drivers, branch v2019.07-rc1 Unnamed repository; edit this file 'description' to name the repository. avb: add support for named persistent values 2019-04-26T22:58:22+00:00 Igor Opaniuk igor.opaniuk@gmail.com 2019-04-09T13:38:14+00:00 fc1fe01b08cedd77a194bb82fa81af4fe1e39031 AVB 2.0 spec. revision 1.1 introduces support for named persistent values that must be tamper evident and allows AVB to store arbitrary key-value pairs [1]. Introduce implementation of two additional AVB operations read_persistent_value()/write_persistent_value() for retrieving/storing named persistent values. Correspondent pull request in the OP-TEE OS project repo [2]. [1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22 [2]: https://github.com/OP-TEE/optee_os/pull/2699 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> 
AVB 2.0 spec. revision 1.1 introduces support for named persistent values
that must be tamper evident and allows AVB to store arbitrary key-value
pairs [1].

Introduce implementation of two additional AVB operations
read_persistent_value()/write_persistent_value() for retrieving/storing
named persistent values.

Correspondent pull request in the OP-TEE OS project repo [2].

[1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22
[2]: https://github.com/OP-TEE/optee_os/pull/2699

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
sysreset: syscon: remove POWER reset cause 2019-04-26T22:58:22+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-04-18T15:16:21+00:00 50fd31fd7781e979254af49efcbc1fbb4882a751 The sysreset of 'POWER' type is a PMIC reset defined as 'remove and restore power'. So normally only COLD/WARN is supported by sysreset_syscon. This modification allows to use the function sysreset_walk(SYSRESET_POWER) when it is supported by PMIC driver (see example in stpmic1). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
The sysreset of 'POWER' type is a PMIC reset defined as
'remove and restore power'.
So normally only COLD/WARN is supported by sysreset_syscon.

This modification allows to use the function sysreset_walk(SYSRESET_POWER)
when it is supported by PMIC driver (see example in stpmic1).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
net: lpc32xx: Use IRAM for transmit buffer 2019-04-26T22:58:20+00:00 Gregory CLEMENT gregory.clement@bootlin.com 2019-04-17T09:41:42+00:00 32dfc12b703faf9e6ab1e544a05ec5dba7d45449 Since the introduction of the driver, some memory in IRAM is reserved for the TX buffers. However there are not used but instead of it, it is the buffer provided by the net stack which is used. As stated in the comment of the driver, not using the IRAM buffer could cause cache issue and lower the throughput. For the second argument it is less the case for transmitting buffers because the throughput gain in IRAM is mitigated by the time to copy the data from RAM to IRAM, but the first argument is still valid and indeed this patch fixes issue seen with Ethernet on some boards Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> 
Since the introduction of the driver, some memory in IRAM is reserved for
the TX buffers.

However there are not used but instead of it, it is the buffer provided
by the net stack which is used. As stated in the comment of the driver,
not using the IRAM buffer could cause cache issue and lower the
throughput.

For the second argument it is less the case for transmitting buffers
because the throughput gain in IRAM is mitigated by the time to copy the
data from RAM to IRAM, but the first argument is still valid and indeed
this patch fixes issue seen with Ethernet on some boards

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
mtd: nand: raw: Fix CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT behavior 2019-04-26T22:58:20+00:00 Gregory CLEMENT gregory.clement@bootlin.com 2019-04-17T09:22:05+00:00 5f626e78491c95dbf3e5036cc0c67aea8b1746fd The purpose of "mtd: nand: raw: allow to disable unneeded ECC layouts" was to allow disabling the default ECC layouts if a driver is known to provide its own ECC layout. However, this commit did the opposite and disabled the default layout when it was _not_ selected. It breaks all the NAND drivers not providing their own ECC layout this patch fix this situation. It was tested with the lpc32xx_nand_slc driver. Fixes: a38c3af868 ("mtd: nand: raw: allow to disable unneeded ECC layouts") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> 
The purpose of "mtd: nand: raw: allow to disable unneeded ECC layouts"
was to allow disabling the default ECC layouts if a driver is known to
provide its own ECC layout. However, this commit did the opposite and
disabled the default layout when it was _not_ selected.

It breaks all the NAND drivers not providing their own ECC layout this
patch fix this situation.

It was tested with the lpc32xx_nand_slc driver.

Fixes: a38c3af868 ("mtd: nand: raw: allow to disable unneeded ECC layouts")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
firmware: ti_sci: Modify auth_boot TI-SCI API to match new version 2019-04-26T21:51:51+00:00 Andrew F. Davis afd@ti.com 2019-04-12T16:54:44+00:00 ff6043a5fd9ada40d5890eb6cf4f624e22c14c80 SYSFW version 2019.01 introduces a slightly modified version of this API, add support for it here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com> 
SYSFW version 2019.01 introduces a slightly modified version of this API,
add support for it here.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
firmware: ti_sci: Add support for firewall management 2019-04-26T21:51:51+00:00 Andrew F. Davis afd@ti.com 2019-04-12T16:54:43+00:00 32ca8ffd5b282da8f4767680ac8b440f73ad41b5 TI-SCI message protocol provides support for controlling the firewall configurations available in SoC. Introduce support for the set of TI-SCI message protocol APIs that provide us with this capability of controlling firewalls. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com> 
TI-SCI message protocol provides support for controlling the firewall
configurations available in SoC.

Introduce support for the set of TI-SCI message protocol APIs that
provide us with this capability of controlling firewalls.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
Merge git://git.denx.de/u-boot-marvell 2019-04-26T17:50:00+00:00 Tom Rini trini@konsulko.com 2019-04-26T17:50:00+00:00 07b68b7843ad1fa15d63dcd26b5ca5a053fcc27f - Add DM based generic watchdog start and reset implementation and remove all ad-hoc implementations (Stefan) - Move mv_sdhci to DM (Pierre) - Misc turris_omnia updates (Pierre) - Change openrd targets to correctly build again (size changes and fixes to the dts targets) and bring it back into Travis builds (Stefan) - Add Kirkwood db-88f6281-bp board (Chris) 
- Add DM based generic watchdog start and reset implementation
  and remove all ad-hoc implementations (Stefan)
- Move mv_sdhci to DM (Pierre)
- Misc turris_omnia updates (Pierre)
- Change openrd targets to correctly build again (size changes
  and fixes to the dts targets) and bring it back into Travis
  builds (Stefan)
- Add Kirkwood db-88f6281-bp board (Chris)
Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-04-26T17:49:58+00:00 Tom Rini trini@konsulko.com 2019-04-26T17:49:58+00:00 1c64692df20c1f491ea79de3a732428611bb0ba0 






watchdog: at91sam9_wdt: Remove now superfluous wdt start and reset
2019-04-26T07:16:32+00:00

Stefan Roese
sr@denx.de

2019-04-11T13:58:47+00:00

c2ff69a444bdc209eecf1bba0685edd7eb5957c3

With the new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

The watchdog servicing is enabled via CONFIG_WATCHDOG.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>





With the new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

The watchdog servicing is enabled via CONFIG_WATCHDOG.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>







watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup
2019-04-26T07:16:32+00:00

Stefan Roese
sr@denx.de

2019-04-11T13:58:46+00:00

f3729ba6e7b2dff9a6f6e72e8839d99c2e3dbb03

With the generic watchdog driver now implemented, this patch removes
some legacy stuff from the MPC8xx watchdog driver and its Kconfig
integration. CONFIG_MPC8xx_WATCHDOG is completely removed and
hw_watchdog_reset() is made static, as the watchdog will now get
serviced via the DM infrastructure if enabled via CONFIG_WATCHDOG.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>





With the generic watchdog driver now implemented, this patch removes
some legacy stuff from the MPC8xx watchdog driver and its Kconfig
integration. CONFIG_MPC8xx_WATCHDOG is completely removed and
hw_watchdog_reset() is made static, as the watchdog will now get
serviced via the DM infrastructure if enabled via CONFIG_WATCHDOG.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>