u-boot.git/drivers, branch v2020.01-rc3

Merge tag 'video-for-v2020.01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

2019-11-18T15:48:29+00:00

- fix i.MX6ULL evk black screen observed while reboot stress tests
- remove "synopsys,dw-mipi-dsi" compatible to reduce the device tree
  differences between Linux and U-Boot for stm32mp1 platform

Merge tag 'u-boot-rockchip-20191118' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip

2019-11-18T02:15:57+00:00

- Add support for rockchip SoC: PX30, RK3308
- Add and migrate to use common dram driver: PX30, RK3328, RK3399
- Add rk3399 board Tinker-s support
- Board config update for Rock960, Rockpro64

rockchip: rk3308: Add sdram driver

2019-11-17T09:22:53+00:00

A dm based dram driver for rk3308 u-boot
to get capacity.

Signed-off-by: Andy Yan 
Reviewed-by: Kever Yang

rockchip: clk: Add clk driver for rk3308

2019-11-17T09:22:53+00:00

Add clk controller driver for RK3308 SOC.

This patch depends on Elaine's pll patch[0].

[0]http://patchwork.ozlabs.org/patch/1183718/

Signed-off-by: Andy Yan 
Reviewed-by: Kever Yang

rockchip: clk: pll: add common pll setting funcs

2019-11-17T09:22:53+00:00

Common PLL setup function, compatible with different SOC.
Mainly for the subsequent new SOC use.

Signed-off-by: Elaine Zhang 
Reviewed-by: Kever Yang

rockchip: clk: fix wrong CONFIG_IS_ENABLED handling

2019-11-17T09:22:53+00:00

CONFIG_IS_ENABLED() needs the config name like used in Kconfig, so
without the leading CONFIG_. The clock drivers all wrongly check for
CONFIG_RESET_ROCKCHIP, fix that

Signed-off-by: Heiko Stuebner 
Reviewed-by: Kever Yang

rockchip: clk: rv1108: remove duplicate reset init

2019-11-17T09:22:53+00:00

rockchip_reset_bind() already does the needed init for the reset
registers, only referenced the wrong cru structure.

So we can get rid of the open-coded reset init and just fix
the correct cru reference.

Signed-off-by: Heiko Stuebner 
Reviewed-by: Kever Yang

rockchip: usb: Migrate to use ofnode

2019-11-17T09:22:53+00:00

Migrate to use ofnode_* instead of fdt_* so that we may able to use live
dt for usb udc driver.

Signed-off-by: Kever Yang

misc: add driver for the Rockchip otp controller

2019-11-17T09:23:15+00:00

Newer Rockchip socs like the px30 use a different ip block to handle
one-time-programmable memory, so add a misc driver for it as well.

Signed-off-by: Finley Xiao 
Signed-off-by: Heiko Stuebner 
Reviewed-by: Kever Yang

net: gmac_rockchip: add support for px30

2019-11-17T09:23:10+00:00

Add the glue code to allow the px30 variant of the Rockchip gmac
to provide network functionality.

Signed-off-by: Heiko Stuebner 
Reviewed-by: Kever Yang