u-boot.git/drivers, branch v2020.10

i2c: rcar_i2c: Fix i2c read/write errors

2020-10-01T03:41:44+00:00

commit 7c8f821e5dde ("i2c: rcar_i2c: Set the slave address from
rcar_i2c_xfer") blindly called rcar_i2c_set_addr() with read argument
always set to 1 during xfer which introduced read/write errors, whereas
earlier rcar_i2c_read_common() called rcar_i2c_set_addr() with read set to
1 and rcar_i2c_write_common() called rcar_i2c_set_addr() with read set 0.

Fixes: 7c8f821e5dde ("i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer")
Signed-off-by: Lad Prabhakar 
Reviewed-by: Marek Vasut 
Reviewed-by: Heiko Schocher

video: typo Normlly

2020-09-29T17:19:08+00:00

%s/Normlly/Normally/

Signed-off-by: Heinrich Schuchardt

mtd: fix typos in drivers/mtd/Kconfig, drivers/mtd/renesas_rpc_hf.c

2020-09-29T17:18:31+00:00

Fix a typo

%s/interract/interact/

Use Samsung's capitalization of their trademarks

%s/onenand/OneNAND/
%s/Hyperflash/HyperFlash/

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Stefan Roese 
[trini: Add other Hyperflash cases as noted by Stefan]
Signed-off-by: Tom Rini

Merge tag 'u-boot-amlogic-20200928' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

2020-09-28T12:26:34+00:00

- fix RNG driver probe & linux EFI KASLR boot on GXL, GXM, G12A, G12B & SM1 based boards

rng: meson: make core clock optional

2020-09-28T07:38:11+00:00

This fixes HWRNG support on Amlogic GXL, GXM, G12A, G12B & SM1
based boards dues to the lack of the core clock in the device tree.

It was reported breaking EFI boot in the Linux EFI stub, because the
EFI_RNG_PROTOCOL didn't check for the RNG device presence before
installing itself.

The Linux amlogic,meson-rng.yaml doesn't mandate the core clock,
this the clock should be ignores if not present.

Nevertheless, the clock should be present and this should be fixed
on the Linux meson-gxl.dtsi & meson-g12-common.dtsi then synced
with U-Boot.

The change has been tested on a Khadas VIM3, which uses the common
meson-g12-common.dtsi like the Odroid-C4 & Odroid-N2 in Scott's
report, along with the RNG cmd.

Cc: Heinrich Schuchardt 
Reported-by: Scott K Logan 
Fixes: bc40eb278b ("drivers/rng: add Amlogic hardware RNG driver")
Signed-off-by: Neil Armstrong 
Tested-by: Scott K Logan 
Signed-off-by: Neil Armstrong

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

2020-09-25T16:55:06+00:00

- Bug fixes related to PCIe, pfe, xfi, gpio, reset, vid, env, and usb on
  layerscape products

pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2

2020-09-24T15:27:32+00:00

LX2160A rev2 uses different PCIe controller, so EP mode DT
nodes also need to be fixed up.

Signed-off-by: Hou Zhiqiang 
Reviewed-by: Priyanka Jain

net: pfe_eth: Remove non-DM code check from pfe_spi_flash_init

2020-09-24T15:27:32+00:00

CONFIG_DM_SPI_FLASH is only supported now with passing of driver
conversion deadline from non-DM to DM model. Hence, it's safe to remove
non-DM code check from pfe_spi_flash_init.

Also use CONFIG_ENV_SPI_MODE and CONFIG_ENV_SPI_MAX_HZ instead of
reading reading values from DT.

Signed-off-by: Kuldeep Singh 
Reviewed-by: Priyanka Jain

net: pfe_eth: Fix resoure leak in pfe_spi_flash_init

2020-09-24T15:27:32+00:00

Fix Coverity issue: RESOURCE_LEAK.
leaked_storage: Variable addr going out of scope leaks the storage it
points to.

Fixes: e0152dbed683 ("net: pfe_eth: Use spi_flash_read API to access
flash memory")
Signed-off-by: Kuldeep Singh 
Reviewed-by: Priyanka Jain

driver: net: fm: add support for XFI

2020-09-24T15:27:32+00:00

All the 10G ports that were working in XFI mode were described as
using XGMII (as PHY_INTERFACE_MODE_XFI was not added at the time).
Add the minimal changes required for the FMan code to support XFI.

Signed-off-by: Madalin Bucur 
Reviewed-by: Priyanka Jain