u-boot.git/drivers, branch v2022.01

usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable

2022-01-08T16:16:03+00:00

Fastboot support has been broken on platforms using dwc2 controller
since the gadget gets its max packet size from it.
This patch is the equivalent of 723fd5668ff which fixed the same issue
but for the chipidea controller.

Fixes: 27c9141b111 ("usb: gadget: fastboot: use correct max packet size")

Signed-off-by: Gary Bisson 
Reviewed-by: Neil Armstrong 
Tested-by: Mattijs Korpershoek

Revert "clk: Detect failure to set defaults"

2022-01-07T14:30:45+00:00

This reverts commit 92f1e9a4b31c0bf0f4f61ab823a6a88657323646.
The aforementioned patch causes massive breakage on all platforms which
have 'assigned-clock' DT property in their DT which references any clock
that are not supported by the platform clock driver. That can easily
happen either in SPL, or because the clock driver is reduced. Currently
it seems all iMX8M are affected and fail to boot altogether.

Signed-off-by: Marek Vasut 
Cc: Peng Fan 
Cc: Simon Glass 
Reviewed-by: Sean Anderson 
Reviewed-by: Fabio Estevam 
Reviewed-by: Simon Glass

Merge tag 'video-20211228' of https://source.denx.de/u-boot/custodians/u-boot-video

2021-12-28T16:19:26+00:00

- mxsfb axi/disp_axi clock enable fix

Merge tag 'efi-2022-01-rc4-4' of https://source.denx.de/u-boot/custodians/u-boot-efi

2021-12-28T12:59:56+00:00

Pull request for efi-2022-01-rc4-4

UEFI:

* allow for more than 16 KiB UEFI variable size when using StMM

Others:

* make watchdog sysreset compatible with separate poweroff driver
* avoid OpenSSL deprecation warnings

video: mxsfb: fix clk_get_by_name() return value check

2021-12-26T23:30:37+00:00

If clk_get_by_name() returns 0 it means it executed successfully while now
we consider it as an error. So let's check if return value is negative to
be an error. Otherwise this prevents "axi" and "disp_axi" to be enabled.

Signed-off-by: Giulio Benetti

Merge https://source.denx.de/u-boot/custodians/u-boot-spi

2021-12-26T19:07:41+00:00

sysreset: watchdog: watchdog cannot power off

2021-12-26T05:49:14+00:00

The watchdog system reset driver can reboot the device but it cannot power
it off. If power off is requested, the driver should not reset the system
but leave powering off to one of the other system reset drivers.

As power cycling is typically not a feature of a watchdog driver the reset
types SYSRESET_POWER and SYSRESET_POWER_OFF shall both be excluded.

Fixes: 17a0c14164dc ("dm: sysreset: add watchdog-reboot driver")
Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Stefan Roese

power: pmic/fan53555: allow dm be omitted by SPL

2021-12-24T07:15:03+00:00

Allow the dm driver be omitted by SPL.

Cc: Quentin Schulz 
Signed-off-by: Quentin Schulz 
Reviewed-by: Simon Glass 
Reviewed-by: Jaehoon Chung 
Reviewed-by: Kever Yang

i2c: mvtwsi: Swab the register address if its size is > 1

2021-12-20T06:57:48+00:00

Testing on Armada XP with an EEPROM using register address with size
of 2 has shown, that the register address bytes are sent to the I2C
EEPROM in the incorrect order. This patch swabs the address bytes so
that the correct address is transferred to the I2C device.

BTW: This worked without any issues before migrating Armada XP to
DM I2C.

Signed-off-by: Stefan Roese 
Cc: Heiko Schocher 
Cc: Samuel Holland 
Cc: Baruch Siach 
Cc: Pali Rohár 
Cc: Marek Behún 
Tested-by: Marek Behún

blk: add a helper function, blk_probe_or_unbind()

2021-12-18T11:05:19+00:00

This function will be commonly used in block device drivers
in the succeeding patches.

Signed-off-by: AKASHI Takahiro 
Reviewed-by: Simon Glass 
Reviewed-by: Heinrich Schuchardt