u-boot.git/drivers, branch v2022.04

video: Do not show splash and U-Boot logo simultaneously

2022-03-31T12:27:51+00:00

Currently, on imx6sabresd and gwventana boards, the company logo
and U-Boot logo are shown.

The correct behavior is to show only the company logo, if available,
and not both logos.

Reported-by: Tim Harvey 
Signed-off-by: Fabio Estevam 
Tested-by: Tim Harvey  #gw_ventana

mtd: gpmi: fix the bch setting backward compatible issue

2022-03-28T12:22:17+00:00

Previous u-boot code changed the default bch setting behavior and caused
backward compatible issue. This fix choose the legacy bch geometry back
again as the default option. If the minimum ecc strength that NAND chips
required need to be chosen, it can be enabled by either adding DT flag
"fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The
unused flag "fsl,legacy-bch-geometry" get removed.

Fixes: 51cdf83eea (mtd: gpmi: provide the option to use legacy bch geometry)
Fixes: 616f03daba (mtd: gpmi: change the BCH layout setting for large oob NAND)
Tested-by: Tim Harvey 
Tested-by: Sean Nyekjaer 
Signed-off-by: Han Xu 
Reviewed-by: Miquel Raynal

Fix URLs to old freescale git repos

2022-03-28T12:22:17+00:00

Freescale git repos are now on source.codeaurora.org.

Signed-off-by: Pali Rohár

bootcount: clarify documentation

2022-03-23T06:27:38+00:00

- Grammar fixes
- Clarify explanations

Signed-off-by: Michael Opdenacker 
Reviewed-by: Heiko Schocher

i2c: fix always-true condition in i2c_probe_chip()

2022-03-23T06:27:37+00:00

Per dm_i2c_ops.probe_chip documentation, i2c_probe_chip() shall fallback
to default probe method when .probe_chip() returns -ENOSYS.

Signed-off-by: Nikita Yushchenko 
Reviewed-by: Heiko Schocher

misc: atsha204a: fix i2c address readout from DTS

2022-03-23T06:27:37+00:00

This patch replaces use fdtdec_get_addr with simpler dev_read_addr().
fdtdec_get_addr doesn't work properly on ZynqMP-based (64bit) system. Although
not confirmed, it could be related to the fact, that quoting the documentation,
"This variant hard-codes the number of cells used to represent the address and
size based on sizeof(fdt_addr_t) and sizeof(fdt_size_t)".

Signed-off-by: Adrian Fiergolski 
Reviewed-by: Marek Behún

misc: atsha204a: add delay after sending the message

2022-03-23T06:27:37+00:00

Once request is sent, and before receiving a response, the delay is required.
This patch fixes missing delay for before first response try.

Signed-off-by: Adrian Fiergolski 
Reviewed-by: Marek Behún

misc: atsha204a: return timeout from wakeup function

2022-03-23T06:27:37+00:00

If the maximum number of wake-up attempts is exceeded, return -ETIMEDOUT.

Signed-off-by: Adrian Fiergolski 
Reviewed-by: Marek Behún

rockchip: ram: sdram_rk3x88: replace comma by semicolon

2022-03-18T10:12:03+00:00

A comma at the end of a line gives sometimes strange
effects in combination with some code formatters,
so replace a comma by a semicolon in the sdram_rk3188.c
and sdram_rk3288.c files.

Signed-off-by: Johan Jonker 
Reviewed-by: Simon Glass 
Reviewed-by: Jagan Teki 
Reviewed-by: Kever Yang

rockchip: saradc: remove double semi-colon

2022-03-18T10:12:03+00:00

Remove double semi-colon that has been forgotten while adding the
driver. This is only a style fix since it doesn't change the
functionality of the driver.

Signed-off-by: Giulio Benetti 
Reviewed-by: Kever Yang