u-boot.git/drivers, branch v2022.10-rc5 Unnamed repository; edit this file 'description' to name the repository. Merge tag 'u-boot-imx-20220919' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2022-09-19T12:38:32+00:00 Tom Rini trini@konsulko.com 2022-09-19T12:38:32+00:00 c1db6be55da2fd157118425cb95145c4e737a908 u-boot-imx-20220919 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500 - Fix imx8mn-beacon-kit-u-boot - Merged Purism - imxrt1170 (already merged in u-boot-imx) - Fixes in crypto FSL - Toradex : fixes Verdin - Serial Driver: fixes when not used as console - DH Boards : fixes + USB - Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig) - Add imx6ulz_smm_m2 
u-boot-imx-20220919
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500

- Fix imx8mn-beacon-kit-u-boot
- Merged Purism
- imxrt1170 (already merged in u-boot-imx)
- Fixes in crypto FSL
- Toradex : fixes Verdin
- Serial Driver: fixes when not used as console
- DH Boards : fixes + USB
- Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig)
- Add imx6ulz_smm_m2
serial: mxc: have putc use the TXFIFO 2022-09-18T20:56:10+00:00 Johannes Schneider johannes.schneider@leica-geosystems.com 2022-09-06T12:15:04+00:00 c7878a0483c59c48a730123bc0f4659fd40921bf only waiting for TXEMPTY leads to corrupted messages going over the wire - which is fixed by making use of the FIFO this change is following the linux kernel uart driver (drivers/tty/serial/imx.c), which also checks UTS_TXFULL instead of UTS_TXEMPTY Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de> 
only waiting for TXEMPTY leads to corrupted messages going over the
wire - which is fixed by making use of the FIFO

this change is following the linux kernel uart driver
(drivers/tty/serial/imx.c), which also checks UTS_TXFULL
instead of UTS_TXEMPTY

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
serial: mxc: enable the RX pipeline 2022-09-18T20:56:10+00:00 Johannes Schneider johannes.schneider@leica-geosystems.com 2022-09-06T12:15:03+00:00 25b7ce32871f94b96385b31e4bd6b1fd830cccd7 on imx8(mm) the RXDMUXSEL needs to be set for data going over the wire (as observable on a connected 'scope) to actually make it into the RXFIFO the reference manual is not overly clear about this, and only mentiones that "UCR3_RXDMUXSEL should always be set." - and since the CR3 register reverts to its reset values after setting the baudrate, setting this bit is done during '_mxc_serial_setbgr' Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de> 
on imx8(mm) the RXDMUXSEL needs to be set for data going over the wire
(as observable on a connected 'scope) to actually make it into the
RXFIFO

the reference manual is not overly clear about this, and only
mentiones that "UCR3_RXDMUXSEL should always be set." - and since the
CR3 register reverts to its reset values after setting the baudrate,
setting this bit is done during '_mxc_serial_setbgr'

Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
imx8m: ddrphy_utils: Remove unused file 2022-09-18T20:56:10+00:00 Marek Vasut marex@denx.de 2022-08-19T11:02:23+00:00 7e9bd84883aeb1e241c21ee267db623aee881c05 The ddrphy_utils.c is now deduplicated in drivers/ddr/imx/phy/ddrphy_utils.c , this drivers/ddr/imx/imx8m/ddrphy_utils.c is a remnant from when the deduplication was implemented and was not removed. Remove it as it is unused. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> 
The ddrphy_utils.c is now deduplicated in drivers/ddr/imx/phy/ddrphy_utils.c ,
this drivers/ddr/imx/imx8m/ddrphy_utils.c is a remnant from when the
deduplication was implemented and was not removed. Remove it as it is
unused.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
crypto/fsl: fsl_hash: Fix crash in flush dcache 2022-09-18T20:56:09+00:00 Gaurav Jain gaurav.jain@nxp.com 2022-07-29T10:02:23+00:00 41460786884691a804091c4b1f125be68e4a0820 wrong end address passed to flush_dcache_range. modified the flush_dache logic for scatter list elements. Fixes: 1919f58a8f (crypto/fsl: fsl_hash: Fix dcache issue in caam_hash_finish) Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> 
wrong end address passed to flush_dcache_range.
modified the flush_dache logic for scatter list elements.

Fixes: 1919f58a8f (crypto/fsl: fsl_hash: Fix dcache issue in caam_hash_finish)
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
RAM: Add changes for i.MXRT11xx series 2022-09-18T18:42:56+00:00 Jesse Taube mr.bossman075@gmail.com 2022-07-26T05:43:44+00:00 7d9c6f1781be08512703aa1aa2f6bb9b17b7150f The i.MXRT11 series has different offsets for IOCR_MUX, it also can address 64MiB of SDRAM so add a macro for that. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> 
The i.MXRT11 series has different offsets for IOCR_MUX, it also can
address 64MiB of SDRAM so add a macro for that.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
clk: imx: Add initial support for i.MXRT1170 clock driver 2022-09-18T18:42:56+00:00 Jesse Taube mr.bossman075@gmail.com 2022-07-26T05:43:43+00:00 79f7632e80e35461812015582e38ea2ff8fe2b8a Add clock driver support for i.MXRT1170. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> 
Add clock driver support for i.MXRT1170.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
clk: imx: Add i.MXRT11xx pllv3 variant 2022-09-18T18:42:56+00:00 Jesse Taube mr.bossman075@gmail.com 2022-07-26T05:43:42+00:00 2242ac5d800916058bd9f4e4380ceeac40025305 The i.MXRT11 series has two new pll types but are variants of existing. This patch adds the ability to read one of the pll types' frequency as it can't be changed unlike the generic pll it also has the division factors swapped. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> 
The i.MXRT11 series has two new pll types but are variants of existing.
This patch adds the ability to read one of the pll types' frequency
as it can't be changed unlike the generic pll it also has the
division factors swapped.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Merge branch 'mpc85xx-for-v2022.10-rc5' of https://source.denx.de/u-boot/custodians/u-boot-mpc85xx 2022-09-18T15:41:08+00:00 Tom Rini trini@konsulko.com 2022-09-18T15:41:08+00:00 0b3fe2b9777eff12ffd6735fc00291616b407622 






timer: orion-timer: Use timer_conv_64() to fix timer wrap around
2022-09-18T10:41:57+00:00

Stefan Roese
sr@denx.de

2022-09-15T14:20:36+00:00

5996a8a8356c11c6eb504eeea93c267f9adbf53c

While testing on some Kirkwood platforms it was noticed that the timer
did not function correctly all the time. The driver did not correctly
handle 32bit timer value wrap arounds. Using the timer_conv_64()
conversion function fixes this issue.

Fixes: e9e73d78a8fb ("timer: add orion-timer support")
Suggested-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>





While testing on some Kirkwood platforms it was noticed that the timer
did not function correctly all the time. The driver did not correctly
handle 32bit timer value wrap arounds. Using the timer_conv_64()
conversion function fixes this issue.

Fixes: e9e73d78a8fb ("timer: add orion-timer support")
Suggested-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>