u-boot.git/drivers, branch v2023.07-rc2 Unnamed repository; edit this file 'description' to name the repository. Merge branch 'for-2023.07-2' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx 2023-05-07T13:44:27+00:00 Tom Rini trini@konsulko.com 2023-05-07T13:44:27+00:00 1917a1a8a8bad28170cd464e5ea61ff0d738310b This pull request adds misc fixes for cssi boards and activates CPM relocation in order to enable the use of SCC4 in QMC (QUICC Multi-Channel) mode. 
This pull request adds misc fixes for cssi boards and activates
CPM relocation in order to enable the use of SCC4 in
QMC (QUICC Multi-Channel) mode.
net: phy: Request rgmii-id phy reset gpio as output 2023-05-05T22:03:18+00:00 Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com 2023-05-02T12:50:43+00:00 1a3af267c097c330fb2bf12493186a345523df38 Request the reset gpio of the rgmii-id phy as output to be consistent with the eth-phy-uclass driver. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Michal Simek <michal.simek@amd.com> 
Request the reset gpio of the rgmii-id phy as output to be consistent
with the eth-phy-uclass driver.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
net: rtl8169: add minimal support for 8125B variant 2023-05-05T21:59:20+00:00 Eugen Hristev eugen.hristev@collabora.com 2023-04-25T13:06:58+00:00 bcbb64b1990cc1f3f8137c05fbc49b13fcb320ff Add minimal support for 8125B version. Changes are based on the Linux driver. Tested on Radxa Rock 5B Rk3588 board. Connection to a laptop worked fine in 100 Mbps mode. 1000 Mbps mode is not working at the moment. Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
Add minimal support for 8125B version.
Changes are based on the Linux driver.
Tested on Radxa Rock 5B Rk3588 board.

Connection to a laptop worked fine in 100 Mbps mode.
1000 Mbps mode is not working at the moment.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
net: phy: dp83867: Explicitly check against sgmii 2023-05-05T21:48:44+00:00 Nishanth Menon nm@ti.com 2023-04-14T22:06:43+00:00 0207403eebec7f0918d84003666c30c4d0067197 dp83867 driver only supports sgmii and not all the newer protocols. Drop the usage of the generic phy_interface_is_sgmii function and just matchup to the specific mode supported. Reported-by: Tom Rini <trini@konsulko.com> Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Suggested-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/all/b82ac325-4818-8e72-054b-640268dbf806@mailbox.org/ Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
dp83867 driver only supports sgmii and not all the newer protocols.
Drop the usage of the generic phy_interface_is_sgmii function and just
matchup to the specific mode supported.

Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Suggested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/all/b82ac325-4818-8e72-054b-640268dbf806@mailbox.org/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
net: share fastboot boot handle logic between transports 2023-05-05T21:48:44+00:00 Dmitrii Merkurev dimorinny@google.com 2023-04-12T18:49:31+00:00 c8acbbbf0847744ff2ad98e9d8d4e11d5e37eda2 Introduce reboot, boot and continue commands support to TCP fastboot by moving existing UDP logic into the common module. Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Introduce reboot, boot and continue commands support to
TCP fastboot by moving existing UDP logic into the common module.

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
net: add fastboot TCP support 2023-05-05T21:48:44+00:00 Dmitrii Merkurev dimorinny@google.com 2023-04-12T18:49:30+00:00 443d319180a68156ca152d164f446e6789004c1d Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Known limitations are
1. fastboot reboot doesn't work (answering OK but not rebooting)
2. flashing isn't supported (TCP transport only limitation)

The command syntax is
fastboot tcp

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
phy: realtek: don't duplicate genphy_startup 2023-05-05T21:48:44+00:00 Rasmus Villemoes rasmus.villemoes@prevas.dk 2023-03-28T21:21:08+00:00 0b99afec9c8bb49fd2c28b35f36546b135b52b13 rtl8211e_startup() is an exact copy of genphy_startup(). Use that instead of duplicating it. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> 
rtl8211e_startup() is an exact copy of genphy_startup(). Use that
instead of duplicating it.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
phy: broadcom: don't duplicate genphy_startup 2023-05-05T21:48:44+00:00 Rasmus Villemoes rasmus.villemoes@prevas.dk 2023-03-28T21:12:47+00:00 8c0ed61390533410fef275c2bc86acc5ac35fa4b Functionally, bcm_cygnus_startup() is an exact copy of genphy_startup(). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> 
Functionally, bcm_cygnus_startup() is an exact copy of
genphy_startup().

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
net: phy: gmii2rgmii: Support external rgmii-id phy 2023-05-05T21:48:44+00:00 Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com 2023-03-22T08:42:47+00:00 29003429617945250e2cafed985f8221d4b46832 Read the phy mode of the external phy from the device tree if available and check that it is a RGMII variant. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> 
Read the phy mode of the external phy from the device tree if available
and check that it is a RGMII variant.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Let the EQoS in imx8mp handle fixed-phy too. 2023-05-05T21:48:37+00:00 Elmar Psilog epsi@gmx.de 2023-02-20T15:03:15+00:00 96d58ecac89eeb24e16e0dffb35ddefce59c18a3 Without that patch it lost track to the node to scan speed and duplex. Patch was created by Marek Vasut, just tested by me. Signed-off-by: Elmar Psilog <epsi@gmx.de> Reviewed-by: Marek Vasut <marex@denx.de> 
Without that patch it lost track to the node to scan
speed and duplex.
Patch was created by Marek Vasut, just tested by me.

Signed-off-by: Elmar Psilog <epsi@gmx.de>
Reviewed-by: Marek Vasut <marex@denx.de>