u-boot.git/drivers, branch v2025.01-rc1

gpio: dw: Add ngpios DT-property support

2024-10-28T08:11:33+00:00

Starting with Linux commit 7569486d79ae ("gpio: dwapb: Add ngpios
DT-property support") the "snps,nr-gpios" property was marked
as deprecated.

And since all newly added dw-apb-gpio nodes are described using generic
"ngpios" property, it's time to add support for it.

Signed-off-by: Maksim Kiselev 
Reviewed-by: Leo Yu-Chi Liang

Merge patch series "Implement ACPI on aarch64"

2024-10-28T00:44:13+00:00

Patrick Rudolph  says:

Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.

The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.

The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.

The changes were tested on real hardware as well on QEMU v9.0:

qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
                    -pflash secure-world.rom \
                    -pflash unsecure-world.rom

qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic

Tested against FWTS V24.03.00.

Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
  USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
  cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
  Linux kernel module doesn't support ACPI yet.

Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com

arm: mach-bcm283x: Add ARMV8_MULTIENTRY support

2024-10-27T23:24:13+00:00

When ACPI is enabled over FDT the APs cannot be brought out of reset
by the OS using the "FDT spin-table" mechanism, as no FDT is provided
to the OS. The APs must be released out of reset in u-boot and then
brought up in an ACPI compliant fashion.

When ARMV8_MULTIENTRY is specified, the APs are released from reset
and will enter U-Boot after it has been relocated as well.

By default ARMV8_MULTIENTRY is not selected, keeping existing behaviour.

TEST: All APs enter U-Boot when run on qemu-system-aarch64 and on
      real hardware.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Simon Glass 
Cc: Matthias Brugger 
Cc: Peter Robinson 
Cc: Tom Rini

arm: mach-bcm283x: Bring in some header files from tianocore

2024-10-27T23:24:13+00:00

These header files presumably duplicate things already in the U-Boot
devicetree. For now, bring them in to get the ASL code and ACPI table
code to compile.

Signed-off-by: Simon Glass 
Signed-off-by: Patrick Rudolph 
Reviewed-by: Simon Glass 
Acked-by: Matthias Brugger 
Cc: Matthias Brugger 
Cc: Peter Robinson 
Cc: Tom Rini

drivers/arm: Implement acpi_fill_madt

2024-10-27T23:24:13+00:00

Fill the MADT table in the GIC driver and armv8 CPU driver to
drop SoC specific code. While the GIC only needs devicetree
data, the CPU driver needs additional information stored in
the cpu_plat struct.

While on it update the only board making use of the existing
drivers and writing ACPI MADT in mainboard code.

TEST: Booted on QEMU sbsa-ref using GICV3 driver model generated MADT.
      Booted on QEMU raspb4 using GICV2 driver model generated MADT.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Simon Glass 
Cc: Simon Glass

drivers: misc: irq-uclass: Update irq_get_by_index

2024-10-27T23:24:13+00:00

Support reading the "interrupts" property from the devicetree in case
the "interrupts-extended" property isn't found. As the "interrupts"
property is commonly used, this allows to parse all existing FDT and
makes irq_get_by_index() more useful.

The "interrupts" property doesn't contain a phandle as "interrupts-extended"
does, so implement a new method to locate the interrupt-parent called
irq_get_interrupt_parent().

TEST: Read the interrupts from the GIC node for ACPI MADT generation.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Moritz Fischer

drivers/cpu: Add generic armv8 cpu driver

2024-10-27T23:24:13+00:00

Add a generic driver that binds to armv8 CPU nodes. The generic driver allows
- to enumerate CPUs present in a system, even when no other driver binds it
- generates ACPI SSDT code for each CPU
- Fill the ACPI MADT table (implemented in a follow up patch)

The newly introduced code could also be reused on other CPU drivers that are
compatible with armv8.

TEST: Booted on QEMU sbsa and verify the driver binds to CPU nodes.
      Confirmed with FWTS that all ACPI processor devices are present.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Simon Glass 
Cc: Tom Rini 
Cc: Simon Glass

drivers: ata: Rename ahci_mvebu

2024-10-27T23:24:13+00:00

Rename 'ahci_mvebu' to 'ahci_generic' and select it by default.
The AHCI driver contains no SoC specific code and only expects the
base address to be passed, thus rename it to ahci_generic and add the
DT compatible string "generic-ahci".

Update existing defconfigs to use the new Kconfig name as well.

TEST: Booted on QEMU sbsa using the generic-ahci node.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Stefan Roese 
Cc: Tom Rini 
Cc: Stefan Roese 
Acked-by: Tony Dinh

drivers: usb: Add generic XHCI

2024-10-27T23:24:13+00:00

Add support for the generic XHCI driver that contains no SoC
specific code. It can be used on platforms that simply work out
of the box, like on emulated platforms.

TEST: Booted on QEMU sbsa machine using the generic xhci driver.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Marek Vasut 
Cc: Tom Rini 
Cc: Marek Vasut

acpi: Add fill_madt to acpi_ops

2024-10-27T23:24:13+00:00

Add a new method to acpi_ops to let drivers fill out ACPI MADT.
The code is unused for now until drivers implement the new ops.

TEST: Booted on QEMU sbsa using driver model generated MADT.

Signed-off-by: Patrick Rudolph 
Reviewed-by: Simon Glass 
Cc: Simon Glass