The commit ac30d90f3367 ("clk: Ensure the parent clocks are enabled
while reparenting") add a call to clk_enable() for the parent clock.

For clock drivers that do not implement the enable() ops, like most
Rockchip clock drivers, this now cause the set_parent() ops to never
be called when CLK_CCF=n (default for Rockchip).

clk_enable() typically return -ENOSYS when the enable() ops is not
implemented by the clock driver, with CLK_CCF=y clk_enable() instead
return 0 when the enable() ops is unimplemented.

Change to ignore -ENOSYS from the newly introduced clk_enable() call to
fix this regression and restore the old behavior of set_parent() ops
being called regardless of if enable() ops is implemented or not.

Fixes: ac30d90f3367 ("clk: Ensure the parent clocks are enabled while reparenting")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Dang Huynh <danct12@riseup.net>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>

Currently, Synopsis xgmac driver only works if DMA region is under 4GB.
This change enables the DMA buffers allocations above 4GB memory
regions.

Signed-off-by: Nikunj Kela <nikunj.kela@sima.ai>

This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.

Signed-off-by: Tom Rini <trini@konsulko.com>

CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/26117

- New Board support: rk3566 LCKFB TaishanPi, rk3588 Xunlong Orange Pi 5
  Max;
- Add rk3288 rmii support;
- pinctrl driver fix;
- binman description update;

Add support for Skyworks AAT2870 LED Backlight Driver and Multiple LDO
Lighting Management Unit. Only backlight is supported as for now. Supported
backlight level range is from 2 to 255 with step of 1.

Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

LG LH400WV3-SD04 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

Hitachi TX10D07VM0BAA is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.

Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

Add support for 8-bit CPU driven (primary and secondary) display signal
interface found in Tegra 2 and Tegra 3 SoC.

Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

MAX8907 PMIC has embedded poweroff function used by some device to initiane
device power off. Implement it as optional sysreset driver guarded by
kconfig option and system-power-controller device tree property.

Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>