Pull request net-20260209.

net:
- airoha: mdio support for the switch
- phy: mscc: allow RGMII with internal delay for the VSC8541
- dwc_eth_qos: Update tail pointer handling

net-legacy:
- Stop conflating return value with file size in net_loop()

net-lwip:
- wget: rework the '#' printing
- tftp: add support of tsize option to client

First set of u-boot-at91 features for the 2026.04 cycle:

This small fixes set includes fixing 64 bit builds and some warnings for
the at91 serial driver, and some cleanup on the nand driver.

i.MX95 uses System Manager(sm) API to start/stop logical machine or cpu.
There are two modes:
 M7 in a dedicated logical machine, use LMM API
 M7 and A55 in same logical machine, use CPU API

Extend the driver to using LMM and CPU protocol to manage the M7 core:
 - Detect using LMM or CPU API in probe using API scmi_imx_lmm_info().
 - Compare linux LM ID(got using scmi_imx_lmm_info) and M7 LM ID(the ID
   is fixed as 1 in SM firmware if M7 is in a separate LM),
   if Linux LM ID is not same as M7 LM ID(linux and M7 in same LM), use
   LMM protocol to start/stop. Whether using CPU or LMM protocol to
   start/stop, the M7 status detection could use CPU protocol to detect
   started or not. So in imx_rproc_is_running, use scmi_imx_cpu_started to
   check the status of M7.
 - For above case (2), Use scmi_imx_lmm_power_boot to detect whether
   the M7 LM is under control of A55 LM.
 - For above case , after using SCMI_IMX_LMM_POWER_ON to check
   permission, scmi_imx_lmm_shutdown API should be called to shutdown
   the M7 LM.
 - Add a new ops imx_rproc_ops_sm.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add a new flag ATT_ECC which indicates the memory region needs ECC
initialization. If the flag is set, clearing the whole memory region to
initialize ECC. If ECC is not initialized, remote core will crash if
directly access the area.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

The i.MX91 SoC reuses the ENET FEC from i.MX93. Add all required driver
checks to make it work also on the i.MX91 based platforms.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>

Add the missing RGMII modes with internal delay for the VSC8541.

Fixes: a5fd13ad1913 ("net: phy: MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541")
Signed-off-by: Charles Perry <charles.perry@microchip.com>

mdio is a child node of the switch, so to get switch base address
we need to lookup for a parent node

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>

Commit d2145a89bcf6 ("net: airoha: bind MDIO controller on Ethernet load")
uses "airoha,en7581-switch" dts node for finding MDIO childs. This is wrong
for EN7523 SoC. The correct node name should be used instead.

Fixes: d2145a89bcf6 ("net: airoha: bind MDIO controller on Ethernet load")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>

Commit d2145a89bcf6 ("net: airoha: bind MDIO controller on Ethernet load")
refers to non-present CONFIG_MDIO_MT7531 and non-present "mt7531-mdio"
driver. It should use CONFIG_MDIO_MT7531_MMIO and "mt7531-mdio-mmio"
instead.

Fixes: d2145a89bcf6 ("net: airoha: bind MDIO controller on Ethernet load")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>

Multicast and Broadcast Queue Enable and Promiscuous Mode Enable bits
are currently written to "unused" registers using magic values.

Define more of the "unused" MAC regs based on information in the
DesignWare Cores Ethernet Quality-of-Service databook.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>