[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git

- Remove netc_timerX nodes from arch/arm/dts/imx943-u-boot.dtsi as they
  are now upstream
- Move dts/upstream/include/dt-bindings/reset/bcm6318-reset.h to
  include/dt-bindings/reset/bcm6318-reset.h as upstream has removed this
  file as unused (but we use it).

Signed-off-by: Tom Rini <trini@konsulko.com>

Add configuration for ARMv8-M aarch32 core, which are currently
Cortex-M23/M33 cores. These cores are treated similar to ARMv7-M
cores, except the code has to be compiled with matching compiler
-march=armv8-m.main flag . These cores have no MMU, they have MPU,
which is currently not configured.

Unlike ARMv7-M, these cores have 512 interrupt vectors. While the
SYS_ARM_ARCH should be set to 8, it is set to 7 because all of the
initialization code is built from arch/arm/cpu/armv7m and not armv8.
Furthermore, CONFIG_ARM64 must be disabled, although DTs for devices
using these cores do come from arch/arm64/boot/dts.

To avoid excess duplication in Makefiles, introduce one new Kconfig
symbol, CPU_V7M_V8M. The CPU_V7M_V8M cover both ARMv7-M and ARMv8-M
cores.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Udit Kumar <u-kumar1@ti.com>

The TPL_OF_CONTROL option can only select TPL_OF_LIBFDT functionality if
we also have enabled TPL_LIBGENERIC_SUPPORT, so express this dependency
in Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

Our sandbox platform are not appropriate for OF_UPSTREAM, reflect this in
Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

Add i.MX952 EVK basic device tree, with UART1, SDHC[1,2] supported.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

[ upstream commit: a5aa8551d0046ec701e8962f83361165ccf640a4 ]

(cherry picked from commit bf18a0f083bdf73f806a3afb9b606b2cb0fcafb3)

i.MX952 is designed for AI-powered sensor fusion and vision sensing
applications, it features 4 Corte-A55, 1 Cortex-M33, 1 Cortex-M7 and
NXP eIQ NPU and advanced graphics, video and advanced security with
edgelock. Product info could be found at:
https://www.nxp.com/products/i.MX-952

The basic device tree includes:
- clock, pin, power header files
- device nodes: CPU[0-3], SCMI firmware, Interrupt Controller, Sys counter,
  eDMA, MU, SPI, UART, I2C, USB and etc

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

[ upstream commit: b516a4dd6a1ff7ddbaf3ab30ddec88088a6ec9e6 ]

(cherry picked from commit 3546aa155a84b8af636d44c852c864845e654864)

[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git

When building Exynos boards, configure OF_UPSTREAM_VENDOR to build all
device trees in:
 - "samsung/" for 32-bit ARM platforms.
 - "exynos/" for 64-bit ARM platforms.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Our last sync with the kernel was 5.1.

We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.

This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>a #rebased on -next

[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git