u-boot.git/dts, branch v2025.01

Revert "arm64: dts: ti: k3-j7200: Fix OSPI boot"

2024-11-29T13:50:33+00:00

While I had thought this commit was a cherry-pick from upstream, it is
not. And so, this is not allowed here.

This reverts commit dfe5f16a33453b742a66cabc8ea9a52a33279810.

Signed-off-by: Tom Rini

arm64: dts: ti: k3-j7200: Fix OSPI boot

2024-11-22T20:37:49+00:00

OSPI boot is broken due to missing bootph property
in pin mux of OSPI.
So add bootph to fix OSPI boot.

Signed-off-by: Udit Kumar

Merge tag 'u-boot-rockchip-20241111' of https://source.denx.de/u-boot/custodians/u-boot-rockchip

2024-11-11T13:25:25+00:00

CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/23280

- Add board:
        rk3328: FriendlyElec NanoPi R2S Plus
        rk3568: Qnap TS433
        rk3588: Cool Pi CM5 GenBook
- Move rk3399_force_power_on_reset to TPL for puma board;

arm64: dts: rockchip: Add DTS for FriendlyARM NanoPi R2S Plus

2024-11-11T07:14:14+00:00

The R2S Plus is basically an R2S with additional eMMC.

The eMMC configuration for the DTS has been extracted and copied from
rk3328-nanopi-r2.dts, v2017.09 branch from the friendlyarm/uboot-rockchip
repository.

Signed-off-by: Sergey Bostandzhyan 
Link: https://lore.kernel.org/r/20240814170048.23816-2-jin@mediatomb.cc
Signed-off-by: Heiko Stuebner 

[ upstream commit: b8c02878292200ebb5b4a8cfc9dbf227327908bd ]

(cherry picked from commit c9bf98827964441f4dd16faa45bd4046f472e693)
Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang

arm64: dts: rockchip: Add support for rk3588 based Cool Pi CM5 GenBook

2024-11-11T07:14:14+00:00

Cool Pi CM5 GenBook works as a carrier board connect with CM5 [0].

Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080

This patch add basic support to bringup eMMC/USB HOST/WiFi/TouchPad/
Battery/PCIE NVME, and can also drive a HDMI output with out of tree
hdmi patches.

[0] https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588

Signed-off-by: Andy Yan 
Link: https://lore.kernel.org/r/20240730102433.540260-3-andyshrk@163.com
Signed-off-by: Heiko Stuebner 

[ upstream commit: 4a8c1161b843c366776fc872a6fe45b743b2983e ]

(cherry picked from commit dc6316da23734d9321e09f8c8a7669f4b4cb9f75)
Reviewed-by: Kever Yang

ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier board

2024-11-09T11:54:35+00:00

Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial ports, USB OTG, USB host
with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio,
PCIe and HDMI video output.

All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.

Backport from linux-next commit
c3f5d76a6e03 ("ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier board")

Signed-off-by: Marek Vasut 
Reviewed-by: Christoph Niedermaier 
Signed-off-by: Shawn Guo

arm64: dts: rockchip: add product-data eeproms to QNAP TS433

2024-11-08T09:05:36+00:00

The device contains two i2c-connected eeproms holding some product-
specific values. One sitting on the mainboard and one on the statically
connected backplane.

While the eeprom chips themself have a size of 512 byte, the eeprom data
only uses 256 byte each, probably to stay compatible with other models.

Signed-off-by: Heiko Stuebner 
Link: https://lore.kernel.org/r/20240810211438.286441-3-heiko@sntech.de

[ upstream commit: da6f4130234448122fe3e66c8116f7d9eea8a5c7 ]

(cherry picked from commit 0b3109708caf5002ba188ae28eae9ce46b2c39b4)
Reviewed-by: Kever Yang

arm64: dts: rockchip: actually enable pmu-io-domains on qnap-ts433

2024-11-08T09:05:36+00:00

Contrary to the vendor-kernel the pmu-io-domains are not enabled by
default. This resulted in the value not being set according to the
regulator, which in turn made the gmac0 interface that is connected
to the vccio4 supply inoperable.

Fixes: 64b7f16fb394 ("arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433")
Signed-off-by: Heiko Stuebner 
Link: https://lore.kernel.org/r/20240805162052.3345768-1-heiko@sntech.de

[ upstream commit: 40cc4257169712f0ae3835820a4c5afbdd1a16ff ]

(cherry picked from commit f509fcb1fb82117e551b489592ac5714a6c5cd8d)
Reviewed-by: Kever Yang

arm64: dts: rockchip: Simplify network PHY connection on qnap-ts433

2024-11-08T09:05:36+00:00

While it requires to have the right phy driver loaded (i.e. motorcomm)
to make the phy asserting the right delays, this is generally the
preferred way to define the MAC <-> PHY connection.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/20240304084612.711678-2-ukleinek@debian.org
Signed-off-by: Heiko Stuebner 

[ upstream commit: e8d45544f806f3b55c30345de84262cbb9504902 ]

(cherry picked from commit e0bbe061fd537bd7b113c53eb046bbcbf0e6597d)
Reviewed-by: Kever Yang

arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433

2024-11-08T09:05:36+00:00

Add the two supplies for the pmu-io-domains that are defined in the
vendor devicetree for the TS433.

Tested-by: Uwe Kleine-König 
Signed-off-by: Heiko Stuebner 
Link: https://lore.kernel.org/r/20240723195538.1133436-15-heiko@sntech.de

[ upstream commit: 64b7f16fb3947e5d08d9e9b860ce966250e45d52 ]

(cherry picked from commit 9b4d4c02b5762196063ab03c5439f96cbbaf2485)
Reviewed-by: Kever Yang