Support for using "u-boot,dm-..." rather than "bootph-..." has been
deprecated since February 2023. Any platforms using this have had a
console message saying to migrate by 2023.07. Go and remove all support
here now, for the v2026.01 release.

The results of this change that aren't clear from the above are that we
still have a checkpatch.pl error message, and document in
doc/develop/spl.rst that they have been migrated since 2023. We also
change the key2dtsi.py tool to use the correct bootph phase rather than
the legacy phase.

Signed-off-by: Tom Rini <trini@konsulko.com>

Anshul Dalal <anshuld@ti.com> says:

This patch series adds support for AM6254atl SiP (or AM62x SiP for
short) to U-Boot.

The OPN (Orderable Part Number) 'AM6254atl' expands as follows[1]:

AM6254atl
     ||||
     |||+-- Feature Lookup (L indicates 512MiB of integrated LPDDR4)
     ||+--- Device Speed Grade (T indicates 1.25GHz on A53 cores)
     |+---- Silicon PG Revision (A indicates SR 1.0)
     +----- Core configuration (4 indicates A53's in Quad core config)

AM62x SiP provides the existing AM62x SoC with 512MiB of DDR
integrated in a single packages. The first 4 patches in the series
are cherry-picked from the devicetree-rebasing repository at
'v6.18-rc2-dts'.

Link: https://lore.kernel.org/r/20251025-62sip_support-v3-0-b4c8314d0055@ti.com

This patch adds the dt for SK-AM62-SIP, which uses the existing
SK-AM62 board design with the new AM6254atl SiP. This changes the
location of memory node from the board dts to SoC level dtsi
(k3-am6254atl in our case).

Therefore this patch introduces the new 'k3-am625-sk-common.dtsi'
which represents the common hardware used for both 'am625-sk' and
'am6254atl-sk' boards with the inheritance hierarchy modified to:

k3-am625-sk.dts:

     k3-am62    k3-am62x-sk-common
        |            |
    k3-am625    k3-am625-sk-common
        |            |
        +-----+------+
              |
         k3-am625-sk

k3-am6254atl-sk.dts:

     k3-am62
        |
     k3-am625       k3-am62x-sk-common
        |                |
    k3-am6254atl    k3-am625-sk-common
        |                |
        +-------+--------+
                |
         k3-am6254atl-sk

Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20250814134531.2743874-5-anshuld@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

[ upstream commit: 2517e476b819df986fa1fe53927c099032bb72dc ]

(cherry picked from commit 58cd89aff167661dbae0c9911282ea3f1b8212cc)

This patch adds the top level dtsi for AM6254atl SiP which integrates
the existing AM625 SoC with 512MiB of DDR in a single package.

More information about the package can be found here:
https://www.ti.com/lit/ds/symlink/am625sip.pdf

Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20250814134531.2743874-4-anshuld@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

[ upstream commit: 7c1d13a14e61ab33eec330cb6cabbddb37eecaa9 ]

(cherry picked from commit fa5a6a6e784bde78c6ec74eccd92d51fb9fd49e8)

The k3-am62x-sk-common dtsi represents the common hardware used across
am62x EVMs which can be configured with various DDR sizes or none (with
DDR integrated in the package) based on the specific am62x SoC used.

Therefore this patch moves the memory node and the SoC specific k3-am625
dtsi out of sk-common and into the board dts files. No functional change
is intended from this patch. The device-tree inheritance is changed as
follows:

Before:

               k3-am62
                 ^
               k3-am625
                 ^
         k3-am62x-sk-common
                 ^
  am62x EVMs (k3-am625-sk, k3-am62-lp-sk)

After:

        k3-am62
          ^
        k3-am625    k3-am62x-sk-common
          ^              ^
  am62x EVMs (k3-am625-sk, k3-am62-lp-sk)

Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://patch.msgid.link/20250814134531.2743874-2-anshuld@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

[ upstream commit: e0b9feca7329c495a76891d7766a781dea73787d ]

(cherry picked from commit 0b0edbbdf43bac6b28dd59c88647bd5e0b73ffea)

Add the label name 'reserved_memory' to the reserved-memory node in all
K3 AM6* board level dts files. This is done so that the node can be
referenced and extended to add more carveout entries as needed in future
refactoring patches.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-13-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

[ upstream commit: 4f1aee4723a796a92f17b23699dc861b582ddfd2 ]

(cherry picked from commit 58c447fe500d78f5adc373b4945d8317e11df072)

The Sige1 is a single board computer developed by ArmSoM, based on the
Rockchip RK3528A SoC.

Add initial device tree for the ArmSoM Sige1 board.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250717103720.2853031-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

[ upstream commit: 1c6b12ef9575bc18dad2393e50ca1ebf96f0a0c8 ]

(cherry picked from commit 3ba04aa78ba71faab4a339f5ab15bc81a3e0a51b)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

The ROCK 2A and ROCK 2F is a high-performance single board computer
developed by Radxa, based on the Rockchip RK3528A SoC.

Add initial device tree for the Radxa ROCK 2A and ROCK 2F boards.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250717103720.2853031-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

[ upstream commit: 5b71b3d9aa61626d6a93ed2f761a748aa2ecfa95 ]

(cherry picked from commit d272bc0c747a5af49cf98140ebd25a702f84ab52)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Milk-V Mars CM Lite is a System-on-Module based on the Milk-V Mars CM
without the onboard eMMC storage component populated and configured
instead for SD3.0 Card Slot on that interface via 100-pin connector.

Link to Milk-V Mars CM Lite schematics: https://github.com/milkv-mars/mars-files/tree/main/Mars-CM_Hardware_Schematices
Link to StarFive JH7110 Technical Reference Manual: https://doc-en.rvspace.org/JH7110/TRM/index.html
Link to Raspberry Pi CM4IO datasheet: https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf

Add the devicetree file to make use of StarFive JH7110 common supported
features PMIC, EEPROM, UART, I2C, GPIO, PCIe, QSPI Flash, PWM, and
Ethernet. Also configure the eMMC interface mmc0 for SD Card use and
configure the common SD Card interface mmc1 for onboard SDIO BT+WiFi.

Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

[ upstream commit: 4cce8b2503ab50f75a2dbc3eef2e55722836588e ]

(cherry picked from commit c7821d537e5a61e5d543588674b71fb43ec0665b)

Add "milkv,marscm-lite" as a StarFive JH7110 SoC-based system-on-module.

Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

[ upstream commit: 12a29108384cfe073a4de778d5207d53b492f85e ]

(cherry picked from commit ae7213970a0c80e90fac9ff0d2aa2966655983f5)