When CONFIG_SYS_MMC_ENV_PART=2, the environment is loaded from
the USER partition (hwpart=0) instead of from the
BOOT1 partition (hwpart=2).

IS_ENABLED() cannot be used for non-boolean KConfig options.
Its documentation states:

> * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y',
> * 0 otherwise.

So in our case, IS_ENABLED(CONFIG_SYS_MMC_ENV_PART) evaluates to 0.

Because of this, the hwpart variable is never assigned and mmc_offset()
ends up switching back to the USER hwpart (0) instead of BOOT1 (2).

Fix it by using #define instead.

Tested with:

  # have CONFIG_SYS_MMC_ENV_PART=2 in defconfig
  # 1. Erase mmc0boot1
  => mmc dev 0 2
  => mmc erase 0 400
  => mmc read ${loadaddr} 0 400
  => md ${loadaddr} 4
  82000000: 00000000 00000000 00000000 00000000  ................

  # 2. Restore default environment and save to MMC
  => env default -a -f
  => saveenv

  # 3. Read back mmc0boot1 and confirm the env is present
  => mmc read ${loadaddr} 0 400
  => md ${loadaddr} 4
  82000000: 13e0632e 72646461 7469665f 3978303d  .c..addr_fit=0x9

Fixes: 5b4acb0ff79d ("env: mmc: Apply GPT only on eMMC user HW partition")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

This removes a number of duplicate newlines throughout the codebase.

Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

When enabling CONFIG_ENV_IS_IN_EXT4 the environment might be stored on
an mmc device similar to the CONFIG_ENV_IS_IN_FAT case.

Fixes: 7d080773347c ("Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Add support for AMD Versal Gen 2. SoC is based on Cortex-a78ae 4 cluster/2
cpu core each. A lot of IPs are shared with previous families. There are
couple of new IP blocks where the most interesting from user point of view
is UFS.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/bc2b70831ce1031bd0fac32357bff84936e1310f.1716994063.git.michal.simek@amd.com

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

Specifying a file in an EXT4 or FAT partition on a virtio device as
environment location failed because virtio hadn't been initialized by
the time the environment was loaded. This patch mirrors commit
54ee5ae84191 ("Add SCSI scan for ENV in EXT4 or FAT") in issue and
fix, just for a different kind of block device.

The additional include in include/virtio.h is needed so all functions
called there are defined, the alternative would have been to include
dm/device.h separately in the env/ sources.

Checkpatch suggests using "if (IS_ENABLED(CONFIG...))" instead of
"#if defined(CONFIG_...)", I'm sticking to the style of the existing
code here.

Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Bin Meng <bmeng.cn@gmail.com>
CC: Rogier Stam <rogier@unrailed.org>

Remove <common.h> from all "env/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

With the migration to Kconfig complete, we can now add some previously
missing dependencies to some commands.

Signed-off-by: Tom Rini <trini@konsulko.com>