u-boot.git/examples, branch v2019.01-rc2

spi: Remove used spi_init

2018-11-27T15:36:53+00:00

spi_init used in some areas in tree, but the respective
drivers will remove in future patches.

So remove the same instances.

Signed-off-by: Jagan Teki

MIPS: fix linking of standalone programs

2018-11-18T15:02:23+00:00

Use the global MIPS specific u-boot.lds for linking standalone programs
instead of the outdated ones in examples/standalone/. Also pass --gc-sections
in LDFLAGS_STANDALONE to optimize the size of standalone programs.
Finally remove the deprecated config.mk files in arch/mips/cpu/mips[32,64]/.

Signed-off-by: Daniel Schwierzeck

Kbuild: standalone: do not ignore platform-specific OBJCOPYFLAGS

2018-11-18T15:02:23+00:00

Currently the OBJCOPYFLAGS are cleared when assigning "-O srec"
or "-O binary" for standalone programs. All flags set by arch-specific
Makefiles are lost. This is bad if an arch demands arch-specific
flags for the objcopy step.

Signed-off-by: Daniel Schwierzeck 
Reviewed-by: Tom Rini

Kbuild: add LDFLAGS_STANDALONE

2018-11-18T15:02:23+00:00

Introduce a new Makefile variable for passing LDFLAGS to standalone
programs. Currently the variable CONFIG_STANDALONE_LOAD_ADDR is
misued on some archs to pass a specific linker script.

Signed-off-by: Daniel Schwierzeck 
Reviewed-by: Tom Rini 
Reviewed-by: Rick Chen

lib: Add hexdump

2018-06-13T11:49:12+00:00

Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.

This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------

which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35  ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e  200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30  sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00  0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00  bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39  fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72  ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65  =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32  rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c  000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75  0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30  t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  00..............
...
------------------->8----------------

Source of hexdump.c was copied from Linux kernel v4.7-rc2.

Signed-off-by: Alexey Brodkin 
Cc: Anatolij Gustschin 
Cc: Mario Six 
Cc: Simon Glass 
Cc: Tom Rini 
Cc: Stefan Roese

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

vsprintf.c: add EFI device path printing

2018-01-22T22:09:12+00:00

For debugging efi_loader we need the capability to print EFI
device paths. With this patch we can write:

    debug("device path: %pD", dp);

A possible output would be

    device path: /MemoryMapped(0x0,0x3ff93a82,0x3ff93a82)

This enhancement is not available when building without EFI support
and neither in the SPL nor in the API example.

A test is provided. It can be executed in the sandbox with command
ut_print.

The development for EFI support in the sandbox is currently in
branch u-boot-dm/efi-working. The branch currently lacks
commit 6ea8b580f06b ("efi_loader: correct DeviceNodeToText
for media types"). Ater rebasing the aforementioned branch on
U-Boot v2018.01 the test is executed successfully.

Without EFI support in the sandbox the test is simply skipped.

Suggested-by: Rob Clark 
Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass 
Signed-off-by: Alexander Graf

riscv: Support standalone

2018-01-12T13:05:12+00:00

Run hello_world successfully.

U-Boot 2018.01-rc2-00033-gb265b91-dirty (Dec 22 2017 - 13:54:21 +0800)

DRAM:  1 GiB
MMC:   mmc@f0e00000: 0
SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB
In:    serial@f0300000
Out:   serial@f0300000
Err:   serial@f0300000
Net:
Warning: mac@e0100000 (eth0) using random MAC address - 0a:47:9b:f8:b4:f2
eth0: mac@e0100000
RISC-V # mmc rescan
RISC-V # fatls mmc 0:1
318907   u-boot-ae250-64.bin
1252   hello_world_ae250_32.bin
328787   u-boot-ae250-32.bin

3 file(s), 0 dir(s)

RISC-V # fatload mmc 0:1 0x600000 hello_world_ae250_32.bin
reading hello_world_ae250_32.bin
1252 bytes read in 23 ms (52.7 KiB/s)
RISC-V # go 0x600000
Example expects ABI version 9
Actual U-Boot ABI version 9
Hello World
argc = 1
argv[0] = "0x600000"
argv[1] = "$B@"
Hit any key to exit ...

RISC-V #

Signed-off-by: Rick Chen 
Signed-off-by: Rick Chen 
Signed-off-by: Greentime Hu

examples: add fallback memcpy

2017-09-12T21:58:01+00:00

Solves build issue:

  Building current source for 134 boards (12 threads, 1 job per thread)
         arm:  +   lsxhl
  +examples/api/vsprintf.o: In function `string16':
  +lib/vsprintf.c:278: undefined reference to `memcpy'
  +examples/api/uuid.o: In function `uuid_bin_to_str':
  +lib/uuid.c:197: undefined reference to `memcpy'
  +lib/uuid.c:199: undefined reference to `memcpy'
  +make[3]: *** [examples/api/demo] Error 1
  +make[2]: *** [examples/api] Error 2
  +make[1]: *** [examples] Error 2
  +make: *** [sub-make] Error 2
    133    0    1 /134    sheevaplug

Signed-off-by: Rob Clark

vsprintf.c: add GUID printing

2017-09-12T21:58:00+00:00

This works (roughly) the same way as linux's, but we currently always
print lower-case (ie. we just keep %pUB and %pUL for compat with linux),
mostly just because that is what uuid_bin_to_str() supports.

  %pUb:   01020304-0506-0708-090a-0b0c0d0e0f10
  %pUl:   04030201-0605-0807-090a-0b0c0d0e0f10

It will be used by a later efi_loader paths for efi variables and for
device-path-to-text protocol, and also quite useful for debug prints
of protocol GUIDs.

Signed-off-by: Rob Clark 
Tested-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass