Signed-off-by: Lars Weber <weber@weber-software.com>

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

[BUG]
When passing a btrfs with NO_HOLE feature to U-boot, and if one file
contains holes, then the hash of the file is not correct in U-boot:

 # mkfs.btrfs -f test.img	# Since v5.15, mkfs defaults to NO_HOLES
 # mount test.img /mnt/btrfs
 # xfs_io -f -c "pwrite 0 4k" -c "pwrite 8k 4k" /mnt/btrfs/file
 # md5sum /mnt/btrfs/file
 277f3840b275c74d01e979ea9d75ac19  /mnt/btrfs/file
 # umount /mnt/btrfs
 # ./u-boot
 => host bind 0 /home/adam/test.img
 => ls host 0
 <   >      12288  Mon Dec 27 05:35:23 2021  file
 => load host 0 0x1000000 file
 12288 bytes read in 0 ms
 => md5sum 0x1000000 0x3000
 md5 for 01000000 ... 01002fff ==> 855ffdbe4d0ccc5acab92e1b5330e4c1

The md5sum doesn't match at all.

[CAUSE]
In U-boot btrfs implementation, the function btrfs_read_file() has the
following iteration for file extent iteration:

	/* Read the aligned part */
	while (cur < aligned_end) {
		ret = lookup_data_extent(root, &path, ino, cur, &next_offset);
		if (ret < 0)
			goto out;
		if (ret > 0) {
			/* No next, direct exit */
			if (!next_offset) {
				ret = 0;
				goto out;
			}
		}
		/* Read file extent */

But for NO_HOLES features, hole extents will not have any extent item
for it.
Thus if @cur is at a hole, lookup_data_extent() will just return >0, and
update @next_offset.

But we still believe there is some data to read for @cur for ret > 0
case, causing we read extent data from the next file extent.

This means, what we do for above NO_HOLES btrfs is:
- Read 4K data from disk to file offset [0, 4K)
  So far the data is still correct

- Read 4K data from disk to file offset [4K, 8K)
  We didn't skip the 4K hole, but read the data at file offset [8K, 12K)
  into file offset [4K, 8K).

  This causes the checksum mismatch.

[FIX]
Add extra check to skip to the next non-hole range after
lookup_data_extent().

Signed-off-by: Qu Wenruo <wqu@suse.com>

Now btrfs can utilize the newly intorudced BLAKE2 hash.

Signed-off-by: Qu Wenruo <wqu@suse.com>

This converts the following to Kconfig:
   CONFIG_JFFS2_DEV
   CONFIG_JFFS2_LZO
   CONFIG_JFFS2_NAND
   CONFIG_JFFS2_PART_OFFSET
   CONFIG_JFFS2_PART_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>

For the symbols which are both hard-coded as enabled and used, move to
Kconfig.  The rest of the CONFIG_YAFFS namespace is unselected anywhere,
so we leave it as is.

Signed-off-by: Tom Rini <trini@konsulko.com>

- Fix mtd erase with mtdpart (Marek Behún)
- NXP fspi driver fixes (Kuldeep Singh)

The original purpose of mtd_erase_callback() in Linux at the time it was
imported to U-Boot, was to inform the caller that erasing is done (since
it was an asynchronous operation).

All supplied callback methods in U-Boot do nothing, but the
mtd_erase_callback() function was (until previous patch) grossly abused
in U-Boot's mtdpart implementation for completely different purpose.

Since we got rid of the abusement, remove the mtd_erase_callback()
function and the .callback member from struct erase_info entirely, in
order to avoid such problems in the future.

Signed-off-by: Marek Behún <marek.behun@nic.cz>

This patch optimizes the commit mentioned below by avoiding running
a set of commands which are useless in the case when
size < mydata->sect_size and sect_count would be 0.

Fixes: 5b3ddb17ba ("fs/fat/fat.c: Do not perform zero block reads if there are no blocks left")

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>

Use the common function to avoid code duplication.

Acked-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Simon Glass <sjg@chromium.org>