u-boot.git/include/74xx_7xx.h, branch master

powerpc: 74xx_7xx: remove 74xx_7xx cpu support

2015-01-16T15:24:39+00:00

All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2

Acked-by: Marek Vasut 
Acked-by: Stefan Roese 
Acked-by: York Sun 
Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk 
Cc: Nye Liu 
Cc: Roy Zang

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

powerpc: Move duplicated BAT defines to mmu.h

2009-02-09T23:27:40+00:00

The BAT fields are architected; there's no need for these to be in
cpu-specific files.  Drop the duplication and move these to
include/asm-ppc/mmu.h.  Also, remove the BL_xxx defines that were only
used by the alaska board, and switch to using the BATU_BL_xxx defines
used by all the other boards.  The BL_ defines previously in use
had to be shifted into the proper position for use, which was inefficient.

Signed-off-by: Becky Bruce

[ppc] Fix build breakage for all non-4xx PowerPC variants.

2007-06-22T12:58:04+00:00

- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
- minor 4xx cleanup

Slight code clean up.

2006-12-04T09:56:59+00:00

Add comments, delete duplicate define and remove spaces.
Signed-off-by: Roy Zang

Fix the confilcts when merging 'master' into hpc2.

2006-12-01T04:09:33+00:00

The conflicts due to a new mpc7448 p3m7448 board is in the main tree.

Merge branch 'master' into hpc2

Conflicts:

	MAKEALL
	cpu/74xx_7xx/cpu.c
	cpu/74xx_7xx/cpu_init.c
	cpu/74xx_7xx/speed.c

[PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards

2006-11-29T15:14:05+00:00

This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".

Signed-off-by: Stefan Roese

General code modification for mpc7448hpc2 board support.

2006-11-02T10:49:51+00:00

1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine 
Signed-off-by: Roy Zang

* Patch by Ronen Shitrit, 10 Dec 2003:

2004-01-03T00:43:19+00:00

  Add support for the Marvell DB64360 / DB64460 development boards

* Patch by Detlev Zundel, 10 Dec 2003:
  fix dependency problem in examples/Makefile

Patch by Tom Guilliams, 20 Jun 2003:

2003-06-20T23:10:58+00:00

added CONFIG_750FX support for IBM 750FX processors