u-boot.git/include/_exports.h, branch v2023.07.01

console: Implement flush() function

2022-09-24T14:47:01Z

On certain places it is required to flush output print buffers to ensure that text strings were sent to console or serial devices. For example when printing message that U-Boot is going to boot kernel or when U-Boot is going to change baudrate of terminal device. Therefore introduce a new flush() and fflush() functions into console code. These functions will call .flush callback of associated stdio_dev device. As this function may increase U-Boot side, allow to compile U-Boot without this function. For this purpose there is a new config CONSOLE_FLUSH_SUPPORT which is enabled by default and can be disabled. It is a good idea to have this option enabled for all boards which have enough space for it. When option is disabled when U-Boot defines just empty static inline function fflush() to avoid ifdefs in other code. Signed-off-by: Pali Rohár Reviewed-by: Simon Glass

net: phy: don't require PHY interface mode during PHY creation

2022-04-10T05:44:13Z

Currently we require PHY interface mode to be known when finding/creating the PHY - the functions * phy_connect_phy_id() * phy_device_create() * create_phy_by_mask() * search_for_existing_phy() * get_phy_device_by_mask() * phy_find_by_mask() all require the interface parameter, but the only thing done with it is that it is assigned to phydev->interface. This makes it impossible to find a PHY device without overwriting the set mode. Since the interface mode is not used during .probe() and should be used at first in .config(), drop the interface parameter from these functions. Make the default value of phydev->interface (in phy_device_create()) to be PHY_INTERFACE_MODE_NA. Move the interface parameter to phy_connect_dev(), where it should be. Change all occurrences treewide. In occurrences where we don't call phy_connect_dev() for some reason (they only configure the PHY without connecting it to an ethernet controller), set phydev->interface = value from phy_find_by_mask call. Signed-off-by: Marek Behún Reviewed-by: Ramon Fried Reviewed-by: Vladimir Oltean

dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO

2021-02-21T05:08:00Z

Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Signed-off-by: Igor Opaniuk Reviewed-by: Tom Rini Reviewed-by: Priyanka Jain

common: rename getc() to getchar()

2020-10-22T13:54:53Z

The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt Reviewed-by: Tom Rini Reviewed-by: Simon Glass

command: Remove the cmd_tbl_t typedef

2020-05-18T22:36:55Z

We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass

i2c: remove i2c driver-model compatibility layer

2019-07-29T21:58:52Z

There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski Acked-by: Heiko Schocher

spi: Remove used spi_init

2018-11-27T15:36:53Z

spi_init used in some areas in tree, but the respective drivers will remove in future patches. So remove the same instances. Signed-off-by: Jagan Teki

env: Rename getenv/_f() to env_get()

2017-08-16T12:30:24Z

We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

env: Rename setenv() to env_set()

2017-08-16T12:22:18Z

We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

x86: Don't export interrupt handlers with x86_64

2016-10-11T03:55:33Z

We don't have a way of adjusting these at present so it is best to refuse to export these functions. This can be implemented later if the API is required. Signed-off-by: Simon Glass Reviewed-by: Bin Meng