u-boot.git/include/asm-arm/arch-mx31, branch v2009.08 Unnamed repository; edit this file 'description' to name the repository. MX31: Add NAND SPL boot support to i.MX31 PDK board. 2009-07-06T19:53:18+00:00 Magnus Lilja lilja.magnus@gmail.com 2009-07-04T08:31:24+00:00 d08e5ca301b69ab77ecdd34e2b06aee30d6057d1 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> 
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
MX31: Add basic support for Freescale i.MX31 PDK board. 2009-07-06T19:52:38+00:00 Magnus Lilja lilja.magnus@gmail.com 2009-06-30T23:07:55+00:00 8449f287f5c53d59db13c3c512e6bd1750b692d1 Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Fabio Estevam <fabioestevam@yahoo.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).

This patch assumes that some other program performs the actual
NAND boot.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Acked-by: Fabio Estevam <fabioestevam@yahoo.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
i.MX31: Create a common device file. 2009-06-21T14:18:13+00:00 Magnus Lilja lilja.magnus@gmail.com 2009-06-13T18:50:03+00:00 dd2f6965a6c71f6f711ec98827880152e022c236 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> 
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
MX31: Add NAND SPL for i.MX31. 2009-06-21T14:18:12+00:00 Magnus Lilja lilja.magnus@gmail.com 2009-06-13T18:50:01+00:00 40c642bc19b9fa2906e3172487a522fee456340b This patch adds the NAND SPL framework needed to boot i.MX31 boards from NAND. It has been tested on a i.MX31 PDK board with large page NAND. Small page NANDs should work as well, but this has not been tested. Note: The i.MX31 NFC uses a non-standard layout for large page NANDs, whether this is compatible with a particular setup depends on how the NAND device is programmed by the flash programmer (e.g. JTAG debugger). The patch is based on the work by Maxim Artamonov. Signed-off-by: Maxim Artamonov <scn1874@yandex.ru> Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> 
This patch adds the NAND SPL framework needed to boot i.MX31 boards
from NAND.

It has been tested on a i.MX31 PDK board with large page NAND. Small
page NANDs should work as well, but this has not been tested.

Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
whether this is compatible with a particular setup depends on how
the NAND device is programmed by the flash programmer (e.g. JTAG
debugger).

The patch is based on the work by Maxim Artamonov.

Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
ARM: add an "eet" variant of the imx31_phycore board 2009-02-24T09:44:02+00:00 Guennadi Liakhovetski lg@denx.de 2009-02-24T09:44:02+00:00 a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1 The "eet" variant of the imx31_phycore board has an OLED display, using a s6e63d6 display controller on the first SPI interface, using GPIO57 as a chip-select for it. With this configuration you can display 256 colour BMP images in 16-bit RGB (RGB565) LCD mode. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
The "eet" variant of the imx31_phycore board has an OLED display, using a
s6e63d6 display controller on the first SPI interface, using GPIO57 as a
chip-select for it. With this configuration you can display 256 colour BMP
images in 16-bit RGB (RGB565) LCD mode.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
i.MX31: add a simple gpio driver 2009-02-24T08:43:10+00:00 Guennadi Liakhovetski lg@denx.de 2009-02-07T00:18:07+00:00 b30de3cccf8867566cd314e7c7033904afa5dc9d This is a minimal driver, so far only managing output. It will be used by the mxc_spi.c driver. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
This is a minimal driver, so far only managing output. It will
be used by the mxc_spi.c driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
mx31: add GPIO registers definitions 2009-02-07T22:29:41+00:00 Ilya Yanok yanok@emcraft.com 2009-02-07T21:59:43+00:00 54dc517328709c204a9cbf7a253d9f8e6c4b26ec Added definitions for i.MX31 processor GPIO registers. Signed-off-by: Ilya Yanok <yanok@emcraft.com> 
Added definitions for i.MX31 processor GPIO registers.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
bugfix for i.mx31 CCM_UPCTL reg 2009-01-24T16:49:04+00:00 Maxim Artamonov scn1874@yandex.ru 2008-12-03T02:38:17+00:00 685533646f4ff17a84ec9265cabb60af325b6e1f Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru> 
Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
i.MX31: Fix mx31_gpio_mux() function and MUX_-macros. 2008-08-11T21:33:57+00:00 Magnus Lilja lilja.magnus@gmail.com 2008-08-03T19:44:10+00:00 5276a3584d26a9533404f0ec00c3b61cf9a97939 Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX contacts instead of only the first 256 ones as is the case prior to this patch. Add missing MUX_* macros and update board files to use the new macros. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> 
Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
contacts instead of only the first 256 ones as is the case prior to
this patch.

Add missing MUX_* macros and update board files to use the new macros.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
i.MX31: Fix IOMUX related typos 2008-08-11T21:24:50+00:00 Magnus Lilja lilja.magnus@gmail.com 2008-08-03T19:43:37+00:00 b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac Correct the names of some IOMUX macros. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> 
Correct the names of some IOMUX macros.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>