u-boot.git/include/asm-arm, branch v2009.03 Unnamed repository; edit this file 'description' to name the repository. OMAP3: Add support for OMAP3 die ID 2009-03-13T22:17:43+00:00 Dirk Behme dirk.behme@googlemail.com 2009-03-12T18:30:50+00:00 e6a6a704151c2d7e4a7b485545b48a6020ccca17 Read and store OMAP3 die ID in U-Boot environment. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> 
Read and store OMAP3 die ID in U-Boot environment.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
ARM: add an "eet" variant of the imx31_phycore board 2009-02-24T09:44:02+00:00 Guennadi Liakhovetski lg@denx.de 2009-02-24T09:44:02+00:00 a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1 The "eet" variant of the imx31_phycore board has an OLED display, using a s6e63d6 display controller on the first SPI interface, using GPIO57 as a chip-select for it. With this configuration you can display 256 colour BMP images in 16-bit RGB (RGB565) LCD mode. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
The "eet" variant of the imx31_phycore board has an OLED display, using a
s6e63d6 display controller on the first SPI interface, using GPIO57 as a
chip-select for it. With this configuration you can display 256 colour BMP
images in 16-bit RGB (RGB565) LCD mode.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
i.MX31: add a simple gpio driver 2009-02-24T08:43:10+00:00 Guennadi Liakhovetski lg@denx.de 2009-02-07T00:18:07+00:00 b30de3cccf8867566cd314e7c7033904afa5dc9d This is a minimal driver, so far only managing output. It will be used by the mxc_spi.c driver. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
This is a minimal driver, so far only managing output. It will
be used by the mxc_spi.c driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5 2009-02-22T22:45:40+00:00 Wolfgang Denk wd@denx.de 2009-02-22T22:45:40+00:00 80b827c2b78329c6503b271e43d9eb693d644710 The file was generated from building versatile_defconfig. Signed-off-by: Wolfgang Denk <wd@denx.de> 
The file was generated from building versatile_defconfig.

Signed-off-by: Wolfgang Denk <wd@denx.de>
OMAP3: Clean up MMC code 2009-02-22T17:29:10+00:00 Dirk Behme dirk.behme@googlemail.com 2009-02-20T16:51:28+00:00 aba45c85b22f8c57fc2fedba8e948e06c2e2f5b3 Clean up OMAP3 MMC code: * Convert register access to struct & readx/writex style * Replace hardcode values by macros * Remove macro defined twice Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> 
Clean up OMAP3 MMC code:

* Convert register access to struct & readx/writex style
* Replace hardcode values by macros
* Remove macro defined twice

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
OMAP3: Add OMAP3 auto detection 2009-02-22T17:29:10+00:00 Dirk Behme dirk.behme@googlemail.com 2009-02-12T17:55:42+00:00 6530a8bf8a0274b9419141e4c2c5a235cce5380f This patch adds OMAP3 cpu type auto detection based on OMAP3 register and removes hardcoded values. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> 
This patch adds OMAP3 cpu type auto detection based on OMAP3 register
and removes hardcoded values.

Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
OMAP3: Beagle: Add board revision detection 2009-02-22T17:29:10+00:00 Dirk Behme dirk.behme@googlemail.com 2009-02-12T17:55:41+00:00 f956fd0338f4990793a10f767929ba4963665261 With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX) which might need different software handling. For this, GPIO pin 171 (GPIO module 6, offset 11) can be used to check for board revision. If this pin is low, we have a rev C board. Else it must be a revision Ax or Bx board. To handle board differences you can call function beagle_get_revision(). E.g.: if (beagle_get_revision()) { /* do special revision C stuff here */ } Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> 
With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
which might need different software handling. For this, GPIO pin 171 (GPIO
module 6, offset 11) can be used to check for board revision. If this pin
is low, we have a rev C board. Else it must be a revision Ax or Bx board.

To handle board differences you can call function beagle_get_revision().
E.g.:

if (beagle_get_revision()) {

/* do special revision C stuff here */

}

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-02-18T23:46:32+00:00 Wolfgang Denk wd@denx.de 2009-02-18T23:46:32+00:00 9eb468da3fd8753de55ab271d6ff5ed7f36d7ea2 






Eliminated arch-specific mmc header requirement
2009-02-17T00:07:41+00:00

Andy Fleming
afleming@freescale.com

2008-10-30T21:31:39+00:00

1de97f9856f697380cc504126ab92561ed238803

The current MMC infrastructure relies on the existence of an
arch-specific header file.  This isn't necessary, and a couple
drivers were forced to implement dummy files to meet this requirement.
Instead, we move the stuff in those header files into a more appropriate
place, and eliminate the stubs and the #include of asm/arch/mmc.h

Signed-off-by: Andy Fleming <afleming@freescale.com>





The current MMC infrastructure relies on the existence of an
arch-specific header file.  This isn't necessary, and a couple
drivers were forced to implement dummy files to meet this requirement.
Instead, we move the stuff in those header files into a more appropriate
place, and eliminate the stubs and the #include of asm/arch/mmc.h

Signed-off-by: Andy Fleming <afleming@freescale.com>







Coding style cleanup; update CHANGELOG
2009-02-11T23:08:39+00:00

Wolfgang Denk
wd@denx.de

2009-02-11T23:08:39+00:00

f15c6515fc23f83c51f3de272ca23d86b80e81b1

Signed-off-by: Wolfgang Denk <wd@denx.de>





Signed-off-by: Wolfgang Denk <wd@denx.de>