u-boot.git/include/asm-generic, branch v2018.01

log: Plumb logging into the init sequence

2017-12-07T20:17:00+00:00

Set up logging both before and after relocation.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

log: Add an implementation of logging

2017-12-07T20:17:00+00:00

Add the logging header file and implementation with some configuration
options to control it.

Signed-off-by: Simon Glass

Drop the log buffer

2017-12-07T20:17:00+00:00

This does not appear to be used by any boards. Before introducing a new
log system, remove this old one.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Provide a generic io.h & address mapping functions

2017-10-03T01:52:19+00:00

Most architectures currently supported by U-Boot use trivial
implementations of map_to_physmem & virt_to_phys which simply cast a
physical address to a pointer for use a virtual address & vice-versa.
This results in a lot of duplicate implementations of these mapping
functions.

The set of functions provided by different architectures also differs,
with some having implementations of phys_to_virt & others not. A later
patch will make use of phys_to_virt in architecture-neutral code, and so
requires that it be provided for all architectures.

This patch introduces an asm-generic/io.h which provides generic
implementations of address mapping functions, allowing the duplication
of them between architectures to be removed. Once architectures are
converted to make use of this generic header it will also ensure that
all of phys_to_virt, virt_to_phys, map_physmem & unmap_physmem are
provided. The 2 families of functions differ in that map_physmem may
create dynamic mappings whilst phys_to_virt may not & therefore is more
limited in scope but doesn't require information such as a length &
flags.

This patch doesn't convert any architectures to make use of this generic
header - later patches in the series will do so.

Signed-off-by: Paul Burton 
Cc: Albert Aribaud 
Cc: Alexey Brodkin 
Cc: Angelo Dureghello 
Cc: Bin Meng 
Cc: Daniel Schwierzeck 
Cc: Macpaul Lin 
Cc: Michal Simek 
Cc: Nobuhiro Iwamatsu 
Cc: Thomas Chou 
Cc: Wolfgang Denk 
Acked-by: Angelo Dureghello 
Tested-by: Angelo Dureghello 
Reviewed-by: Simon Glass 
Reviewed-by: Daniel Schwierzeck

efi_loader: rename __efi_hello_world_*

2017-09-18T21:53:56+00:00

In scripts/Makefile.lib we build section including helloworld.efi.
This allows to load the EFI binary with command 'bootefi hello'.

scripts/Makefile.lib contains explicit references to strings
containing helloworld and hello_world. This makes it impossible
to generalize the coding to accomodate additional built in
EFI binaries.

Let us rename the variables __efi_hello_world_* to
__efi_helloworld_*.

Signed-off-by: Heinrich Schuchardt 
Signed-off-by: Alexander Graf

env: Rename getenv/_f() to env_get()

2017-08-16T12:30:24+00:00

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

env: Add an enum for environment state

2017-08-15T12:18:51+00:00

At present we have three states for the environment, numbered 0, 1 and 2.
Add an enum to record this to avoid open-coded values.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN

2017-07-27T12:59:03+00:00

Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan 
Reviewed-by: Tom Rini 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich 
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich

powerpc: Partialy restore core of mpc8xx

2017-07-08T19:55:26+00:00

CS Systemes d'Information (CSSI) manufactures 8xx boards for
critical communication systems. Those boards have been
running U-Boot since 2010 and will have to be maintained
until at least 2027.

commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f
("powerpc, 8xx: remove support for 8xx") orphaned those boards
by removing support for the mpc8xx CPU.

This commit partially restores support for the 8xx, with the
following limitations:
- Restores support for MPC866 and MPC885 only
- Does not restore IDE, PCMCIA, I2C, USB
- Does not restore examples
- Does not restore POST
- Does not restore Ethernet on SCC
- Does not restore console on SCC
- Does not restore bedbug and kgdb support

As the 866 and 885 do not support the following features,
they are not restored either:
- VIDEO / LCD
- RTC clock

The CPM uCODE patch is not restored either, because:
- 866 and 885 already have support for I2C and SPI relocation
without a uCODE patch
- relocation of SMC, I2C or SPI is only needed for using SCCs
for Ethernet or QMC

The dynamic setup/calculation of clocks is removed, we
expect the target being use with the clock and PLPRCR register
defined in the configuration.
All the clock settings for 8xx prior to 866 is removed as
well as we now only support 866 and 885.

This code is mature and addresses mature boards. Therefore
all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
is unneeded.

The following files are not restored by this patch:

- arch/powerpc/cpu/mpc8xx/bedbug_860.c
- arch/powerpc/cpu/mpc8xx/fec.h
- arch/powerpc/cpu/mpc8xx/kgdb.S
- arch/powerpc/cpu/mpc8xx/plprcr_write.S
- arch/powerpc/cpu/mpc8xx/scc.c
- arch/powerpc/cpu/mpc8xx/upatch.c
- arch/powerpc/cpu/mpc8xx/video.c
- arch/powerpc/include/asm/status_led.h
- arch/powerpc/lib/ide.c
- arch/powerpc/lib/ide.h
- doc/README.MPC866
- drivers/pcmcia/mpc8xx_pcmcia.c
- drivers/rtc/mpc8xx.c
- drivers/usb/gadget/mpc8xx_udc.c
- drivers/video/mpc8xx_lcd.c
- examples/standalone/test_burst.c
- examples/standalone/test_burst.h
- examples/standalone/test_burst_lib.S
- examples/standalone/timer.c
- include/mpc823_lcd.h
- include/usb/mpc8xx_udc.h
- post/cpu/mpc8xx/Makefile
- post/cpu/mpc8xx/cache.c
- post/cpu/mpc8xx/cache_8xx.S
- post/cpu/mpc8xx/ether.c
- post/cpu/mpc8xx/spr.c
- post/cpu/mpc8xx/uart.c
- post/cpu/mpc8xx/usb.c
- post/cpu/mpc8xx/watchdog.c

Some of the restored files are not located in a proper location.
In order to keep traceability of the changes, they will be
moved to their correct location and moved to Kconfig in a
followup patch.

This patch also declares CSSI as point of contact for the update
of the 8xx platform, as those boards are the only ones still
being maintained on the 8xx area. A later patch will add
those boards to the tree.

Signed-off-by: Christophe Leroy

avr32: Retire AVR32 for good

2017-07-06T20:17:19+00:00

AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass 
Reviewed-by: Tom Rini 
Reviewed-by: Heiko Schocher 
Signed-off-by: Andy Shevchenko