Conflicts:

	common/cmd_bootm.c
	common/cmd_log.c
	include/common.h
	post/board/lwmon5/Makefile
	post/board/lwmon5/dsp.c
	post/board/lwmon5/dspic.c
	post/board/lwmon5/fpga.c
	post/board/lwmon5/gdc.c
	post/board/lwmon5/sysmon.c
	post/board/lwmon5/watchdog.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

Limit the rate of h/w watch-dog triggering on the LWMON5 board by
the CONFIG_WD_MAX_RATE value.

Note that an earlier version of this patch which used microseconds
instead of ticks dis not work. The problem was that we used
usec2ticks() to convert microseconds into ticks. usec2ticks() uses
get_tbclk(), which in turn calls get_sys_info(). It turns out that
this function does a lot of prolonged operations (like divisions)
which take too much time so we do not trigger the watchdog in time,
and it resets the system.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

delete ddr_clk and use mem_clk instead.  Rename other ddr_*_clk to
mem_*_clk for consistency's sake.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
called.  However, get_sys_info() recalculates extraneous information when
called each time.  Have get_ddr_freq() and get_bus_freq() return memoized
values from global_data instead.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This patch does some shifting around of OF support on 8xx.

Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

marked as POST_CRITICAL fails then the alternative, post_critical,
boot-command is used. If this command is not defined then U-Boot
enters into interactive mode.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

Adds PCI support for MPC5121

Tested with drivers/net/rtl8139.c

Support is conditional since PCI on old silicon does not work.

ads5121_PCI_config turns on PCI

In this version, condition compilation of PCI code has been moved
from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
suggested by Jean-Christophe PLAGNIOL-VILLARD

Signed-off-by: John Rigby <jrigby@freescale.com>

Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.

Update the get_clocks() function in 85xx and 86xx to determine the I2C
clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.

Signed-off-by: Timur Tabi <timur@freescale.com>

R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.

Use r2 instead.

Signed-off-by: Wolfgang Denk <wd@denx.de>