u-boot.git/include/asm-ppc, branch v1.3.4-rc1

85xx: Add some L1/L2 SPR register definitions

2008-07-15T01:19:59+00:00

Add new L1/L2 SPRs related to e500mc cache config and control.

Signed-off-by: Kumar Gala

fdt: add crypto node handling for MPC8{3, 5}xxE processors

2008-07-14T22:01:29+00:00

Delete the crypto node if not on an E-processor.  If on 8360 or 834x family,
check rev and up-rev crypto node (to SEC rev. 2.4 property values)
if on an 'EA' processor, e.g. MPC8349EA.

Signed-off-by: Kim Phillips

Merge commit 'wd/master'

2008-07-10T17:05:32+00:00

ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai

2008-07-10T07:14:01+00:00

Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
To support such configurations, we "only" map the first 2GB via the TLB's. We
need some free virtual address space for the remaining peripherals like, SoC
devices, FLASH etc.

Note that ECC is currently not supported on configurations with more than 2GB
SDRAM. This is because we only map the first 2GB on such systems, and therefore
the ECC parity byte of the remaining area can't be written.

Signed-off-by: Stefan Roese

Feed the watchdog in u-boot for 8610 board.

2008-07-07T16:29:48+00:00

The watchdog on 8610 board is enabled by setting sw[6]
to on. Once enabled, the watchdog can not be disabled
by software. So feed the dog in u-boot is necessary for
normal operation.

Signed-off-by: Jason Jin

Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx

2008-07-06T22:32:47+00:00

PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops

2008-07-01T19:47:12+00:00

fls64, __ilog2_u64, ffs64 are variants that work on an u64,
and fls is used to implement them.

Signed-off-by: Kumar Gala

mpc83xx: move CPU_TYPE_ENTRY over to processor.h

2008-06-25T21:34:29+00:00

to avoid this:

cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
In file included from cpu.c:33:
/home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition

Signed-off-by: Kim Phillips

Fix 4xx build issue

2008-06-19T20:48:45+00:00

Building for 4xx doesn't work since commit 4dbdb768:

In file included from 4xx_pcie.c:28:
include/asm/processor.h:971: error: expected ')' before 'ver'
make[1]: *** [4xx_pcie.o] Error 1

This patch fixes the problem.

Signed-off-by: Anatolij Gustschin 
Acked-by: Stefan Roese 
Acked-by: Kumar Gala

Change bd/gd memsize/ram_size to be phys_size_t.

2008-06-11T22:54:53+00:00

Currently, both are defined as an unsigned long, but
should be phys_size_t. This should result in no real change,
since phys_size_t is currently an unsigned long for all the
default configs.  Also add print_lnum to cmd_bdinfo to deal
with the potentially wider memsize.

Signed-off-by: Becky Bruce