u-boot.git/include/common.h, branch v1.3.0 Unnamed repository; edit this file 'description' to name the repository. powerpc: Backout relocation changes. 2007-11-17T00:38:58+00:00 Grant Likely grant.likely@secretlab.ca 2007-11-14T05:18:33+00:00 1c3dd43338a077165e7e0309cb3994e65d2bdbf8 Ugh. I *hate* to back this change out, but these compiler flags don't work for relocation on all versions of GCC. I've not been able to reproduce the environment in my setup (and hence, not been able to find a combination that *does* work), so I've got no choice but to go back to the old gcc flags and linker script. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 
Ugh.  I *hate* to back this change out, but these compiler flags don't
work for relocation on all versions of GCC.  I've not been able to
reproduce the environment in my setup (and hence, not been able to
find a combination that *does* work), so I've got no choice but to go
back to the old gcc flags and linker script.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[PPC440SPe] Improve PCIe configuration space access 2007-09-07T16:20:23+00:00 Grzegorz Bernacki gjb@semihalf.com 2007-09-07T16:20:23+00:00 7f1913938984ef6c6a46cb53e003719196d9c5de - correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> 
- correct configuration space mapping
- correct bus numbering
- better access to config space

Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
first device on the first bus. We now allow to configure up to 16 buses;
also, scanning for devices behind the PCIe-PCIe bridge is supported, so
peripheral devices farther in hierarchy can be identified.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Add mii_init() prototype 2007-08-29T12:05:30+00:00 Wolfgang Denk wd@denx.de 2007-08-29T12:05:30+00:00 c5bded3c88e48ae648a75d357dc81a8255fa81f1 to get rid of a *lot* of compiler warnings. Signed-off-by: Wolfgang Denk <wd@denx.de> 
to get rid of a *lot* of compiler warnings.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Merge with /home/wd/git/u-boot/custodian/u-boot-coldfire 2007-08-18T19:56:57+00:00 Wolfgang Denk wd@denx.de 2007-08-18T19:56:57+00:00 909627dca4350fca789c117b028b686cfe53e716 






mpc83xx: move common /memory node update mechanism to cpu.c
2007-08-16T03:36:33+00:00

Kim Phillips
kim.phillips@freescale.com

2007-08-16T03:30:26+00:00

6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1

also adds common prototypes to include/common.h.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>





also adds common prototypes to include/common.h.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>







Merge with git://www.denx.de/git/u-boot.git
2007-08-15T12:51:27+00:00

Stefan Roese
sr@denx.de

2007-08-15T12:51:27+00:00

d61ea14885631e58a25feaa81ee82eb464c62d6a












Merge with git://www.denx.de/git/u-boot.git
2007-08-10T18:33:06+00:00

Stefan Roese
sr@denx.de

2007-08-10T18:33:06+00:00

59530af55613a8c5fac3c4e0f5fbcf2f1611c483












[ARM] TI DaVinci support, hopefully final
2007-08-10T18:26:18+00:00

Sergey Kubushyn
ksi@koi8.net

2007-08-10T18:26:18+00:00

c74b2108e31fe09bd1c5d291c3cf360510d4f13e

Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>





Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>







mpc83xx: Add support for the display of reset status
2007-08-10T06:12:03+00:00

Dave Liu
daveliu@freescale.com

2007-06-25T02:41:56+00:00

9be39a67c9f8fef7107f5df09d673005f04d0963

83xx processor family has many reset sources, such as
power on reset, software hard reset, software soft reset,
JTAG, bus monitor, software watchdog, check stop reset,
external hard reset, external software reset.
sometimes, to figure out the fault of system, we need to
know the cause of reset early before the prompt of
u-boot present.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>





83xx processor family has many reset sources, such as
power on reset, software hard reset, software soft reset,
JTAG, bus monitor, software watchdog, check stop reset,
external hard reset, external software reset.
sometimes, to figure out the fault of system, we need to
know the cause of reset early before the prompt of
u-boot present.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>







Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
2007-08-08T07:47:10+00:00

TsiChungLiew
Tsi-Chung.Liew@freescale.com

2007-08-05T08:30:44+00:00

9e737d8476e7d6a596d16caaf6a3853a9a1190a2

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>





Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>