u-boot.git/include/config_cmd_all.h, branch v2012.04

BOOT: Add "bootz" command to boot Linux zImage on ARM

2012-03-30T20:58:55+00:00

This command boots Linux zImage from where the zImage is loaded to. Passing
initrd and fdt is supported.

Tested on i.MX28 based DENX M28EVK
Tested on PXA270 based Voipac PXA270.

NOTE: This currently only supports ARM, but other architectures can be easily
added by defining bootz_setup().

Signed-off-by: Marek Vasut 
Cc: Tom Warren 
Cc: albert.u.boot@aribaud.net
Cc: afleming@gmail.com,
Cc: Simon Glass ,
Cc: Stephen Warren 
Cc: Nicolas Pitre 
Cc: Wolfgang Denk 
Cc: Detlev Zundel

ARM: drop unsupported 'trab' board

2011-06-22T18:00:51+00:00

The 'trab' board configuration is broken, and there is nobody who is
interested and willing to fix it.  Drop it.

This includes support for VFD displays which have always been used by
this board only.

Signed-off-by: Wolfgang Denk

rarp: Condtionally compile rarp support

2010-10-12T06:00:29+00:00

Most people don't use the 'rarpboot' command, so only enable it when
CONFIG_CMD_RARP is defined.

Signed-off-by: Peter Tyser 
Signed-off-by: Ben Warren

config_cmd_all.h: Sort entries alphabetically

2010-04-10T20:19:42+00:00

Signed-off-by: Detlev Zundel

config_cmd_all.h: added missing CONFIG_CMD_UBI and CONFIG_CMD_UBIFS

2010-04-10T20:18:49+00:00

Signed-off-by: Frans Meulenbroeks

Add 'editenv' command

2009-10-27T19:58:25+00:00

The editenv command can be used to edit an environment variable.
Editing an environment variable is useful when one wants to tweak an
existing variable, for example fix a typo or change the baudrate in the
'bootargs' environment variable.

Signed-off-by: Peter Tyser

mflash: Initial mflash support

2009-04-03T21:47:06+00:00

Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
   confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim

Add "source" command; prepare removal of "autoscr" command

2009-04-03T20:01:42+00:00

According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.

This patch prepares this change and starts a 6 month transition
period as follows:

- The new "source" command has been added, which implements exactly
  the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
  new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
  have *not* been adapted yet; these will be renamed resp. removed in
  a separate patch when the support for the "autoscr" command get's
  finally dropped.

Signed-off-by: Wolfgang Denk

Separate mtdparts command from jffs2

2009-03-20T21:39:14+00:00

Currently the mtdparts commands are included in the jffs2 command support.
This doesn't make sense anymore since other commands (e.g. UBI) use this
infrastructure as well now. This patch separates the mtdparts commands from
the jffs2 commands making it possible to only select mtdparts when no JFFS2
support is needed.

Signed-off-by: Stefan Roese 
Signed-off-by: Kyungmin Park

rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV

2009-02-17T23:47:43+00:00

The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
rather than a generic "env" command, or anything else related to the
environment.  So, let's make sure the define is named accordingly.

Signed-off-by: Mike Frysinger