u-boot.git/include/config_distro_bootcmd.h, branch v2018.09

distro: Extend with RISC-V defines

2018-05-29T06:43:12+00:00

While we don't have UEFI naming conventions for RISC-V file paths yet,
we need to search for something. So let's copy the removable file paths
from the RISC-V edk2 port.

Also add the official VCI strings that contain the standardized RISC-V
architecture ID fields.

Signed-off-by: Alexander Graf

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

distro bootcmd: Allow board defined UBI partition and volume names

2018-01-28T17:27:29+00:00

This commit allows overriding the default assumption that the boot UBI
MTD partition is named 'UBI' and the UBI volume is 'boot'. A board
desiring to use a legacy or alternative NAND layout can now define the
following two extra environment variables:

	bootubipart=
	bootubivol=

EXAMPLE:

[include/configs/some_board.h]
---8<-------------------------------------------------------------------
[...]
	#include 

	#define MEM_LAYOUT_ENV_SETTINGS \
		DEFAULT_LINUX_BOOT_ENV

	#define BOOT_TARGET_DEVICES(func) \
		func(UBIFS, ubifs, 0)

	#include 
[...]
	#define CONFIG_EXTRA_ENV_SETTINGS \
		MEM_LAYOUT_ENV_SETTINGS \
		"bootubivol=rootfs\0" \
		"bootubipart=rootfs\0" \
		BOOTENV
[...]
---8<-------------------------------------------------------------------

Signed-off-by: Derald D. Woods

distro bootcmd: define bootloader name for x86

2017-11-30T05:50:17+00:00

Currently X86 does not properly support distro defaults.
This patch is only a partial fix.

It provides the name of the bootloader EFI application
for the X86 architecture.

The architecture dependent file names are defined in the UEFI
specification.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass 
Reviewed-by: Bin Meng

efi_loader: add bootmgr

2017-09-20T09:08:01+00:00

Similar to a "real" UEFI implementation, the bootmgr looks at the
BootOrder and BootXXXX variables to try to find an EFI payload to load
and boot.  This is added as a sub-command of bootefi.

The idea is that the distro bootcmd would first try loading a payload
via the bootmgr, and then if that fails (ie. first boot or corrupted
EFI variables) it would fallback to loading bootaa64.efi.  (Which
would then load fallback.efi which would look for \EFI\*\boot.csv and
populate BootOrder and BootXXXX based on what it found.)

Signed-off-by: Rob Clark 
Signed-off-by: Alexander Graf

Kconfig: Drop CONFIG_CMD_PCI_ENUM

2017-08-11T19:41:51+00:00

This option enables the 'pci enum' command. It is only enabled by a few
board and these have not yet been converted to driver model, which always
enables this command. It seems easiest to just remove this option.

The affected boards can be converted to use driver model for PCI if
needed.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Reviewed-by: Philipp Tomsich

Kconfig: Add CONFIG_SATA to enable SATA

2017-07-11T16:08:19+00:00

At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Kconfig: Add a CONFIG_IDE option

2017-05-22T16:45:27+00:00

At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass

cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT

2017-01-28T13:48:03+00:00

We convert CONFIG_PARTITION_UUIDS to Kconfig first.  But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.

Signed-off-by: Patrick Delaunay 
Signed-off-by: Patrick Delaunay 
Signed-off-by: Tom Rini

efi_loader: Fix typo in distro script

2016-06-24T21:24:41+00:00

The distro script is supposed to use the internal fdt as fallback if we
find no viable other option. However, we're missing a space key to actually
make that work.

Add the space, so we can successfully load an EFI blob even when there is
no device tree provided on the target device.

Signed-off-by: Alexander Graf