u-boot.git/include/config_fallbacks.h, branch v2014.01-rc1

config: Define HAVE_BLOCK_DEVICE when CONFIG_CMD_GPT is set

2013-11-08T20:25:12+00:00

Signed-off-by: Egbert Eich

config: consolidate CONFIG_SYS_HZ definition

2013-11-04T16:05:58+00:00

According to the README, CONFIG_SYS_HZ must be 1000 and most platforms
follow that. In preparation to remove CONFIG_SYS_HZ from all these
platforms, provide a common definition. The platforms which use a value
other than 1000 will get build warning now. These configs are:

include/configs/M5271EVB.h:#define CONFIG_SYS_HZ                        1000000
include/configs/balloon3.h:#define      CONFIG_SYS_HZ                   3250000         /* Timer @ 3250000 Hz */
include/configs/idmr.h:#define CONFIG_SYS_HZ                    (50000000 / 64)
include/configs/mini2440.h:#define CONFIG_SYS_HZ                        1562500
include/configs/mx1ads.h:#define CONFIG_SYS_HZ                  3686400
include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ                     ((V_SCLK) / (2 << CONFIG_SYS_PTV))
include/configs/omap730p2.h:#define CONFIG_SYS_HZ                       ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
include/configs/palmld.h:#define        CONFIG_SYS_HZ                   3250000         /* Timer @ 3250000 Hz */
include/configs/palmtc.h:#define        CONFIG_SYS_HZ                   3686400         /* Timer @ 3686400 Hz */
include/configs/rsk7203.h:#define CONFIG_SYS_HZ                 (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7264.h:#define CONFIG_SYS_HZ         (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7269.h:#define CONFIG_SYS_HZ         (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/scb9328.h:#define CONFIG_SYS_HZ                 3686400      /* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#define CONFIG_SYS_HZ                       (1000000 / 256)
include/configs/zipitz2.h:#define       CONFIG_SYS_HZ                   3250000         /* Timer @ 3250000 Hz */

Signed-off-by: Rob Herring

config: Add a default CONFIG_SYS_PROMPT

2013-11-04T16:02:14+00:00

The definitions for CONFIG_SYS_PROMPT are varied with little reason other
than to display the board name. Over half the definitions are "==> ", so
make this the default. The rest of the boards remain unchanged to avoid
breaking any external scripts expecting a certain prompt.

Signed-off-by: Rob Herring 
Reviewed-by: Fabio Estevam

Makefile: Change CONFIG_SPL_PAD_TO to image offset

2013-04-12T05:55:06+00:00

Change CONFIG_SPL_PAD_TO from a link address to an image offset since this is
more handy and closer to the purpose of this config.

Automatically define CONFIG_SPL_PAD_TO to CONFIG_SPL_MAX_SIZE (or 0 without
CONFIG_SPL_MAX_SIZE).

Test that CONFIG_SPL_PAD_TO >= CONFIG_SPL_MAX_SIZE if CONFIG_SPL_PAD_TO is
non-zero.

Signed-off-by: Benoît Thébaudeau

disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART

2013-03-14T18:06:45+00:00

Various code that is conditional upon HAVE_BLOCK_DEVICE is required by
code conditional upon CONFIG_CMD_PART. So, enable HAVE_BLOCK_DEVICE if
CONFIG_CMD_PART is enabled.

Signed-off-by: Stephen Warren 
Acked-by: Simon Glass 
Acked-by: Tom Rini 
Signed-off-by: Tom Warren

disk: define HAVE_BLOCK_DEVICE in a common place

2013-03-14T18:06:44+00:00

This set of ifdefs is used in a number of places. Move its definition
somewhere common so it doesn't have to be repeated.

Signed-off-by: Stephen Warren 
Acked-by: Simon Glass 
Acked-by: Tom Rini 
Signed-off-by: Tom Warren

fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}

2012-10-29T21:21:19+00:00

This makes the FAT and ext4 filesystem implementations build if
CONFIG_FS_{FAT,EXT4} are defined, rather than basing the build on
whether CONFIG_CMD_{FAT,EXT*} are defined. This will allow the
filesystems to be built separately from the filesystem-specific commands
that use them. This paves the way for the creation of filesystem-generic
commands that used the filesystems, without requiring the filesystem-
specific commands.

Minor documentation changes are made for this change.

The new config options are automatically selected by the old config
options to retain backwards-compatibility.

Signed-off-by: Stephen Warren 
Reviewed-by: Benoît Thébaudeau

CONFIG_SYS_BAUDRATE_TABLE: Add , place there

2012-06-20T18:26:16+00:00

We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in  which mkconfig places after  in
the generated config file.  This is used when a board has not set its
own table.

Signed-off-by: Tom Rini