u-boot.git/include/configs/ASH405.h, branch v2009.08 Unnamed repository; edit this file 'description' to name the repository. NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18T13:32:10+00:00 Wolfgang Denk wd@denx.de 2009-07-18T13:32:10+00:00 170c19725ecd3a0e2e517dfd49979ca8822edec0 Commit 8d2effea added a warning for configurations that use NAND without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but failed to fix the affected boards. Signed-off-by: Wolfgang Denk <wd@denx.de> 
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26T09:40:42+00:00 Matthias Fuchs matthias.fuchs@esd-electronics.com 2009-01-02T11:19:47+00:00 91f33534728e6416d332ad2b53ad1d6fde57f7fc Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59. Either they define or undef it. Because it's not used in any source files this patch removes any references to it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de> 
Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
Either they define or undef it. Because it's not used in any source
files this patch removes any references to it.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23T16:32:51+00:00 Wolfgang Grandegger wg@grandegger.com 2009-01-16T17:55:54+00:00 6c869637fef31e66380f0ea1d49690a2e26ec0d7 This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and changes the default from 8 to 1 for the legacy and the new MTD NAND layer. This allows to remove all NAND_MAX_CHIPS definitions in the board config files because none of the boards use multi chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440 define #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE but that's bogus and did not work anyhow. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com> 
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
changes the default from 8 to 1 for the legacy and the new MTD
NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
in the board config files because none of the boards use multi
chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
define

 #define NAND_MAX_CHIPS          CONFIG_SYS_MAX_NAND_DEVICE

but that's bogus and did not work anyhow.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-10T05:38:04+00:00 Ben Warren biggerbadderben@gmail.com 2008-10-28T06:50:15+00:00 96e21f86e8266ed40759e5495ee461265d7f6d28 All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Stefan Roese <sr@denx.de> 
All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
rename CFG_ macros to CONFIG_SYS 2008-10-18T19:54:03+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-10-16T13:01:15+00:00 6d0f6bcf337c5261c08fabe12982178c2c489d76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references 2008-10-14T12:45:31+00:00 Peter Tyser ptyser@xes-inc.com 2008-09-23T17:39:40+00:00 abbb90666d5ef2f500ebbedbb80ff60adc56b043 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> 
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
rename CFG_ENV macros to CONFIG_ENV 2008-09-10T20:48:06+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-10T20:48:06+00:00 0e8d158664a913392cb01fb11a948d83f72e105e Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM 2008-09-10T19:09:38+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-05T07:19:30+00:00 bb1f8b4f8bb0bfce52e0faa4637b975b745824b3 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
ppc4xx: Remove cache definition from 4xx board config files 2007-10-31T20:21:47+00:00 Stefan Roese sr@denx.de 2007-10-31T16:57:52+00:00 d25dfe08fbd1220cb994e7e6b105049aa9aa8e79 All 4xx board config files don't need the cache definitions anymore. These are now defined in common headers. Signed-off-by: Stefan Roese <sr@denx.de> 
All 4xx board config files don't need the cache definitions anymore.
These are now defined in common headers.

Signed-off-by: Stefan Roese <sr@denx.de>
NAND: Add CFG_NAND_QUIET option 2007-09-15T19:05:33+00:00 Matthias Fuchs matthias.fuchs@esd-electronics.com 2007-09-12T10:36:53+00:00 c750d2e6692a000a82f29de7bf24e3dc21239161 This config option sets the default for the progress information output behavior that can also be configured through the 'quiet' environment variable. The legacy NAND code does not print the current progress info on the console. So this option is for backward compatibility for units that are in the field and where setting the quiet variable is not an option. With CFG_NAND_QUIET set to '1' the console progress info is turned off. This can still be overwritten through the environment variable. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> 
This config option sets the default for the progress information
output behavior that can also be configured through the 'quiet'
environment variable.

The legacy NAND code does not print the current progress info
on the console. So this option is for backward compatibility for
units that are in the field and where setting the quiet variable
is not an option. With CFG_NAND_QUIET set to '1' the console
progress info is turned off. This can still be overwritten
through the environment variable.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>