u-boot.git/include/configs/CANBT.h, branch master

ppc4xx: Remove CANBT board

2013-08-20T15:35:20+00:00

This board and especially the CPU (PPC405CR) is EOL.

Signed-off-by: Matthias Fuchs 
Acked-by: Wolfgang Denk

Merge branch 'master' of git://git.denx.de/u-boot-i2c

2013-07-24T13:50:24+00:00

The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.

Conflicts:
	board/sandburst/common/ppc440gx_i2c.c
	board/sandburst/common/ppc440gx_i2c.h

Signed-off-by: Tom Rini

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

i2c, ppc4xx_i2c: switch to new multibus/multiadapter support

2013-07-23T06:34:56+00:00

Signed-off-by: Dirk Eibach 
Cc: Heiko Schocher 
Cc: Stefan Roese 
Tested-by: Stefan Roese

i2c, soft-i2c: switch to new multibus/multiadapter support

2013-07-23T03:54:29+00:00

- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher 
Cc: Simon Glass 
Cc: Stephen Warren

ppc4xx: Cleanup for partial linking and --gc-sections

2010-11-27T22:35:09+00:00

This commit adapts 4xx boards for partial linking with --gc-sections.

Signed-off-by: Stefan Roese 
Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Cc: Tirumala Marri 
Cc: David Updegraff 
Cc: Matthias Fuchs 
Cc: Dirk Eibach 
Cc: Larry Johnson 
Cc: Peter De Schrijver 
Cc: Niklaus Giger 
Cc: Daniel Poirot 
Acked-by: Stefan Roese

Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

2010-10-26T19:05:30+00:00

CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new  file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk 
Acked-by: Kumar Gala

Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

2010-10-26T19:03:25+00:00

CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
some end address; to make the meaning more clear we rename it into
CONFIG_SYS_INIT_RAM_SIZE

No other code changes are performed in this patch, only minor editing
of white space (due to the changed length) and the comments was done,
where noticed.

Note that the code for the PATI and cmi_mpc5xx board configurations
looks seriously broken.  Last known maintainers on Cc:

Signed-off-by: Wolfgang Denk 
Cc: Denis Peter 
Cc: Martin Winistoerfer 
Acked-by: Kumar Gala

powerpc: Cleanup BOOTFLAG_* references

2010-10-18T20:38:56+00:00

Now that warm booting is not supported, there isn't a need for the
BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.

Note that this change makes the board info bd_bootflags field useless.
It will always be set to 0, but we leave it around so that we don't
break the board info structure that some OSes are expecting to be passed
from U-Boot.

Signed-off-by: Peter Tyser

Makefile: move all Power Architecture boards into boards.cfg

2010-10-18T20:12:04+00:00

Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk