u-boot.git/include/configs/EP1C20.h, branch master Unnamed repository; edit this file 'description' to name the repository. nios2: remove EP1C20, EP1S10, EP1S40 boards 2010-07-12T15:40:12+00:00 Thomas Chou thomas@wytron.com.tw 2010-06-16T06:39:30+00:00 a3c09f66b2b84e98333c317ffb24a95f88ee5a10 The example configuration files of nios2-generic board can generated binary to run on the EP1C20, EP1S10, and EP1S40 boards. So the three boards can be removed. With nios2-generic approach, the fpga parameter header file can be generated from hardware designs using tools. Porting u-boot for nios2 boards is simplified. Vendors can supply their fpga parameter file or patches to add a new nios2-generic board instance. There is no need to include other boards support for nios2 in the u-boot mainline. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com> 
The example configuration files of nios2-generic board can generated
binary to run on the EP1C20, EP1S10, and EP1S40 boards. So the three
boards can be removed.

With nios2-generic approach, the fpga parameter header file can
be generated from hardware designs using tools. Porting u-boot for
nios2 boards is simplified. Vendors can supply their fpga parameter
file or patches to add a new nios2-generic board instance. There is
no need to include other boards support for nios2 in the u-boot
mainline.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02T16:28:41+00:00 Scott McNutt smcnutt@psyent.com 2010-03-31T00:23:04+00:00 3a89a91a10fed545af458418e63d911953a9849c CONFIG_SYS_HZ was being calculated (incorrectly) in nios2 configuration headers. Updated comments to accurately describe timebase macros. Signed-off-by: Scott McNutt <smcnutt@psyent.com> 
   CONFIG_SYS_HZ was being calculated (incorrectly) in nios2 configuration
   headers. Updated comments to accurately describe timebase macros.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
nios2: Move serial drivers to individual files in drivers/serial 2010-04-02T16:28:40+00:00 Scott McNutt smcnutt@psyent.com 2010-03-19T23:03:28+00:00 c9d4f46b5d639a45747d5eaabd31d35856cb918f The standard Altera UART & JTAG UART as well as the OpenCores YANU driver are now in individual files in drivers/serial rather than a single file uner cpu/nios2. Signed-off-by: Scott McNutt <smcnutt@psyent.com> 
   The standard Altera UART & JTAG UART as well as the OpenCores
   YANU driver are now in individual files in drivers/serial
   rather than a single file uner cpu/nios2.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-05T05:37:03+00:00 Ben Warren biggerbadderben@gmail.com 2009-10-05T05:37:03+00:00 7194ab809532eeca3e2ee5dc12017cb901cc5842 All in-tree boards that use this controller have CONFIG_NET_MULTI added Also: - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111 - cleaned up line lengths - modified all boards that override weak function in this driver - modified all eeprom standalone apps to work with new driver - updated blackfin standalone EEPROM app after testing Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 
All in-tree boards that use this controller have CONFIG_NET_MULTI
added
Also:
  - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111
  - cleaned up line lengths
  - modified all boards that override weak function in this driver
  - modified all eeprom standalone apps to work with new driver
  - updated blackfin standalone EEPROM app after testing

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Add "source" command; prepare removal of "autoscr" command 2009-04-03T20:01:42+00:00 Wolfgang Denk wd@denx.de 2009-04-01T21:34:12+00:00 74de7aefd79690bae8cf5a5120f5962d444be089 According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now. This patch prepares this change and starts a 6 month transition period as follows: - The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before - The old "autoscr" command name is kept as an alias for compatibility - Command sequences, script files atc. have been adapted to use the new "source" command - Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped. Signed-off-by: Wolfgang Denk <wd@denx.de> 
According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.

This patch prepares this change and starts a 6 month transition
period as follows:

- The new "source" command has been added, which implements exactly
  the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
  new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
  have *not* been adapted yet; these will be renamed resp. removed in
  a separate patch when the support for the "autoscr" command get's
  finally dropped.

Signed-off-by: Wolfgang Denk <wd@denx.de>
rename CFG_ macros to CONFIG_SYS 2008-10-18T19:54:03+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-10-16T13:01:15+00:00 6d0f6bcf337c5261c08fabe12982178c2c489d76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV macros to CONFIG_ENV 2008-09-10T20:48:06+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-10T20:48:06+00:00 0e8d158664a913392cb01fb11a948d83f72e105e Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH 2008-09-10T20:48:04+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-09-10T20:48:04+00:00 5a1aceb0689e2f731491838970884a673ef7e7d3 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. 2007-07-10T14:03:20+00:00 Jon Loeliger jdl@freescale.com 2007-07-10T14:02:57+00:00 11799434c5ff15a612577bb1ad1f4ea1a0595e4b Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger <jdl@freescale.com> 
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
include/configs: Use new CONFIG_CMD_* in various E* named board config files. 2007-07-08T21:04:42+00:00 Jon Loeliger jdl@freescale.com 2007-07-08T01:56:05+00:00 dcaa71562826a2466e894c868d132509dcda8444 Signed-off-by: Jon Loeliger <jdl@freescale.com> 
Signed-off-by: Jon Loeliger <jdl@freescale.com>