u-boot.git/include/configs/MPC837XEMDS.h, branch u-boot-2016.09.y

configs: Migrate CONFIG_USB_STORAGE

2016-09-09T18:59:35+00:00

In some cases we were missing CONFIG_USB=y so enable that when needed.

Reviewed-by: Masahiro Yamada 
Signed-off-by: Tom Rini

mpc83xx: make it bootable with the latest kernel

2016-07-21T18:08:58+00:00

Due to the blow up of the latest kernel size, the default gnuzip
size (8M) seems too small. The yocto kernel size I built for
mpc8315erdb board is 5294393, and it can't be boot by using the
latest u-boot. So expand gnuzip buffer for all the mpc83xx boards
to fix this issue.

Robert P. J. Day also pointed that the kernel partition on the NAND
flash is also too small, fix it at the same time.

Reported-by: Robert P. J. Day 
Signed-off-by: Kevin Hao 
Reviewed-by: York Sun

mpc83xx: fix the corruption of u-boot when saveenv

2016-07-21T18:08:35+00:00

Robert P. J. Day has pointed that the value of SYS_MONITOR_LEN in
MPC8315ERDB.h is smaller than the u-boot.bin. This will cause the
overlap between the code of u-boot and the environment variable.
So when executing saveenv, it will corrupt the code of u-boot and
causes the board not boot. Fix this for all the mpc83xx boards by
reserving a 512K area.

Reported-by: Robert P. J. Day 
Signed-off-by: Kevin Hao 
Reviewed-by: York Sun

common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option

2016-06-09T17:53:05+00:00

move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.

Signed-off-by: Heiko Schocher 

Reviewed-by: Tom Rini 
Acked-by: Viresh Kumar 
Acked-by: Igor Grinberg

configs: Re-sync with cmd/Kconfig

2016-04-25T19:09:47+00:00

Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini

include/configs: Whitespace fixup

2016-04-25T19:09:46+00:00

A number of moveconfig.py runs have left a instances of multiple empty
lines in a row.  Correct this to a single empty line.

Signed-off-by: Tom Rini

configs: Re-sync almost all of cmd/Kconfig

2016-04-25T19:09:40+00:00

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini

configs: Re-sync HUSH options

2016-04-25T18:22:43+00:00

Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files.  Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.

Signed-off-by: Tom Rini

Kconfig: Move CONFIG_FIT and related options to Kconfig

2016-03-14T23:18:07+00:00

There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass 
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini

Move CONFIG_OF_LIBFDT to Kconfig

2016-03-14T18:50:25+00:00

Move this option to Kconfig and tidy up existing boards.

Signed-off-by: Simon Glass