u-boot.git/include/configs/XPEDITE5370.h, branch master

xes: Make X-ES board names more generic

2010-10-22T07:17:23+00:00

Some U-Boot images for X-ES boards support multiple products in the same
family.  For example, the XPedite5370, XPedite5371, and XPedite5372 are
similar enough that one U-Boot image can work on all 3 cards.  To make it
clear that a U-Boot image can work on boards of the same family, rename
the boards with the least significant digit of 'x'.

While we're at it, change the board config file and make targets to be
lowercase.

Also change the default uImage and fdt filenames to "board.uImage" and
"board.dtb" to be more generic.

Signed-off-by: Peter Tyser 
Signed-off-by: Kumar Gala

xes: Consolidate checkboard()

2010-10-22T07:17:16+00:00

Create a common checkboard() function to support all X-ES's Freescale
boards.

Also, add a get_board_derivative() function which reads hardware
strapping resistors to determine what model a board is.  This allows one
U-Boot image to support multiple boards.

Signed-off-by: John Schmoller 
Signed-off-by: Peter Tyser 
Signed-off-by: Kumar Gala

pci: Add ability to re-enumerate PCI buses

2010-10-22T07:17:12+00:00

Add a new 'pci enum' command which re-enumerates the PCI buses.  This
command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful
in boards with FPGAs connected via PCI/PCIe, boards that support PCI
hot-plugging, or during PCI debug.

Also enable the 'pci enum' command for X-ES's Freescale-based boards.

Signed-off-by: John Schmoller 
Signed-off-by: Peter Tyser 
Acked-by: Kumar Gala 
Acked-by: Wolfgang Denk

xes: Use common PCI initialization code

2010-10-22T07:17:02+00:00

Common Freescale code for PCI initialization now exists, so migrate X-ES
boards to use it.

Signed-off-by: Peter Tyser 
Signed-off-by: Kumar Gala

powerpc: Cleanup BOOTFLAG_* references

2010-10-18T20:38:56+00:00

Now that warm booting is not supported, there isn't a need for the
BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.

Note that this change makes the board info bd_bootflags field useless.
It will always be set to 0, but we leave it around so that we don't
break the board info structure that some OSes are expecting to be passed
from U-Boot.

Signed-off-by: Peter Tyser

Makefile: move all Power Architecture boards into boards.cfg

2010-10-18T20:12:04+00:00

Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk

Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

2010-10-18T20:07:10+00:00

The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk

powerpc/85xx: configure autocompletion support

2010-08-01T16:18:44+00:00

because it's convenient.

Signed-off-by: Kim Phillips 
Signed-off-by: Kumar Gala

powerpc/85xx: Move PCI/PCIe address defines into common immap_85xx.h

2010-07-20T09:37:11+00:00

Remove dupliacted setting of PCI/PCIe address and offsets in board
config.h.

Signed-off-by: Kumar Gala

mpc85xx: Add reginfo command

2010-07-16T15:55:09+00:00

The new command dumps the TLBCAM, the LAWs, and the BR/OR regs.
Add CONFIG_CMD_REGINFO to the config for all MPC85xx parts.

Signed-off-by: Becky Bruce 
Signed-off-by: Kumar Gala