u-boot.git/include/configs/apalis_imx6.h, branch main

imx: Remove CFG_MXC_USB_PORTSC

2024-08-31T01:47:04Z

The definition of CFG_MXC_USB_PORTSC as (PORT_PTS_UTMI | PORT_PTS_PTW) can be removed from mx5/mx6/mx7/mx8m board config files as it is the default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c. Suggested-by: Tim Harvey Signed-off-by: Fabio Estevam Reviewed-by: Tim Harvey

imx: Remove CFG_MXC_USB_FLAGS

2024-08-31T01:46:45Z

CFG_MXC_USB_FLAGS is only used for drivers/usb/host/ehci-mx5.c, so it can be removed from all the imx6/imx7/imx8m board config files. mx51evk.h is the only place CFG_MXC_USB_FLAGS is not set to 0. Suggested-by: Tim Harvey Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Reviewed-by: Peng Fan

net: phy: Replace PHY_ANEG_TIMEOUT with Kconfig symbol

2024-06-13T22:27:07Z

Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol. This removes one more configuration headers option finalizes its Kconfig symbol conversion. No functional change expected. Signed-off-by: Marek Vasut

board: toradex: imx: Remove not needed env variables

2024-04-20T03:37:36Z

Remove not needed variables from environment and include config files. - setup variable used to be executed from some bootscript, however it's not required and there is no point on having this small helper here - boot_file, kernel_file, ip_dyn variables are not used anywhere - fdt_fixup variable is just set empty - defargs, vidargs variables used to be used from some bootscript, however there is no point on having it here and even old legacy bootscript can work without them - removed CONFIG_ENABLE_DDR_TRAINING_DEBUG, this is a leftover from some copy/paste On colibri imx6ull/imx7 NAND module, remove consoleblank=0, this is already the Linux kernel default therefore useless. Various Linux Kernel command line options removed are not-existing left-over that applied to some old NXP i.MX downstream branch Signed-off-by: Francesco Dolcini

global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG

2022-12-23T15:14:51Z

Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini

global: Migrate CONFIG_MXC_UART_BASE to CFG

2022-12-23T15:14:51Z

Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini

global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG

2022-12-23T15:09:42Z

Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini

usb: Remove CONFIG_USBD_HS

2022-12-22T15:31:49Z

This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini

Convert CONFIG_HOSTNAME et al to Kconfig

2022-12-22T15:31:48Z

This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini

Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig

2022-12-05T21:07:12Z

This converts the following to Kconfig: CONFIG_IMX_VIDEO_SKIP CONFIG_IMX_HDMI Signed-off-by: Tom Rini