u-boot.git/include/configs/apx4devkit.h, branch v2015.01

Merge git://git.denx.de/u-boot-arm

2013-07-31T09:30:38+00:00

Conflicts:
	board/freescale/mx6qsabrelite/Makefile
	board/freescale/mx6qsabrelite/mx6qsabrelite.c
	include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

ARM: mxs: Consolidate configuration options

2013-07-24T10:59:57+00:00

Pull all the duplicate configuration options into configs/mxs.h
from the board configuration files. This reduces the files greatly
and makes them somewhat more readable. Besides, we do no longer
have such a horrible duplication of code.

Note that the mx23evk grew in size slightly. This is due to the
CONFIG_SYS_CBSIZE now being set to 1024 as it is on the rest of
MXS systems.

This patch also fixes the OCRAM size for i.MX23. The i.MX23 has
only 32kB of OCRAM, while i.MX28 has 128kB of OCRAM.

I verified the configuration didn't change for each of the boards,
but I didn't boot-test it on the boards I do not have. I configured
U-Boot for each board using the "make ... _config" command
and then ran "cpp -I include -dM include/config.h" , which dumped
all the configuration options. I did this both before and after this
patch and finally compared the results for each MXS board. Actually,
the results do differ slightly, since the configs/mxs.h file now
properly includes the correct iomux-mx23.h or iomux-mx28.h , so
while comparing, I had to ignore these new defines. These have no
impact on U-Boot configuration though.

Signed-off-by: Marek Vasut 
Cc: Fabio Estevam 
Cc: Lauri Hintsala 
Cc: Otavio Salvador 
Cc: Stefano Babic

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

2013-03-15T14:18:31+00:00

mxs: Make ehci-mxs multiport capable

2013-03-07T16:22:57+00:00

Rework ehci-mxs so it supports both ports on MX28. It was necessary
to wrap the per-port configuration into struct ehci_mxs_port and pull
out the clock configuration function.

Signed-off-by: Marek Vasut 
Cc: Fabio Estevam 
Cc: Otavio Salvador 
Cc: Stefano Babic

ubifs: Allow ubifsmount volume reference by number

2013-03-04T19:19:56+00:00

UBI can mount volumes by name or number  The current code forces you
to name the volume by prepending every name with "ubi:".

>From fs/ubifs/super.c
 * There are several ways to specify UBI volumes when mounting UBIFS:
 * o ubiX_Y    - UBI device number X, volume Y;
 * o ubiY      - UBI device number 0, volume Y;
 * o ubiX:NAME - mount UBI device X, volume with name NAME;
 * o ubi:NAME  - mount UBI device 0, volume with name NAME.

Now any name passed in any of the above forms are allowed.

Also update the configs that referenced ubifsmount.

Signed-off-by: Joe Hershberger

configs:Remove unused macro CONFIG_DISCOVER_PHY

2013-02-04T14:05:46+00:00

Remove unused macro CONFIG_DISCOVER_PHY from configs.

Signed-off-by: Ashok Kumar Reddy 
Acked-by: Stefano Babic

MMC: MXS: Toggle the generic bounce buffer on the boards

2012-10-22T07:53:35+00:00

Flip the boards to use the generic bounce buffer instead of the
MMC one.

Signed-off-by: Marek Vasut 
Cc: Andy Fleming 
Cc: Fabio Estevam 
Signed-off-by: Andy Fleming

MX28: Move "regs-base.h" include after SoC type configuration

2012-09-01T12:58:27+00:00

For i.MX233 addition the base registers need to be change so the SoC
definition needs to be known before the header include.

The following boards has been changed:

 * apx4devkit
 * m28evk
 * mx28evk
 * sc_sps_1

Signed-off-by: Otavio Salvador 
Acked-by: Stefano Babic

apx4devkit: Turn on caches

2012-09-01T12:58:25+00:00

Turn on data and instruction caches.

Signed-off-by: Fabio Estevam 
 include/configs/apx4devkit.h |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
Acked-by: Veli-Pekka Peltola