u-boot.git/include/configs/bk4r1.h, branch main

bk4r1: Stop disabling device tree relocation

2025-11-29T17:42:24Z

Remove setting of fdt_high to ~0, which disables device tree relocation, from the default environment. Doing so prevents U-Boot from correcting problems such as having an unaligned device tree and leads to various failure modes in the OS. Signed-off-by: Tom Rini

Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig

2025-02-14T16:19:24Z

Add CONFIG_BOOTCOUNT_ALTBOOTCMD so the developer is able to add custom altbootcmd via Kconfig when they enable BOOTCOUNT. With this now in Kconfig, we need to move it from environment files / config.h files and in to the defconfig file. This was done by generating u-boot-initial-env for all platforms before the Kconfig change, to extract altbootcmd values and then again after to compare the result. [trini: Perform migration to defconfigs, reword commit message] Signed-off-by: Tom Rini

global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG

2022-12-23T15:09:42Z

Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini

global: Move remaining CONFIG_SYS_* to CFG_SYS_*

2022-12-05T21:06:08Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig

2022-11-10T15:08:54Z

This converts the following to Kconfig: CONFIG_SYS_MAX_NAND_DEVICE Signed-off-by: Tom Rini Reviewed-by: Simon Glass

Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et al

2022-08-12T20:10:49Z

This removes the following symbols: CONFIG_SYS_FSL_DSPI_BE CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET CONFIG_SYS_FSL_DSP_DDR_ADDR CONFIG_SYS_FSL_DSP_M2_RAM_ADDR CONFIG_SYS_FSL_DSP_M3_RAM_ADDR CONFIG_SYS_FSL_ERRATUM_A008751 CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT CONFIG_SYS_FSL_ESDHC_NUM CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET CONFIG_SYS_FSL_ISBC_VER CONFIG_SYS_FSL_QSPI_LE CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR CONFIG_SYS_FSL_SRDS_NUM_PLLS CONFIG_SYS_FSL_WDOG_BE CONFIG_SYS_GP1DIR CONFIG_SYS_GP1ODR CONFIG_SYS_GP2DIR CONFIG_SYS_GP2ODR CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HMI_BASE FSL_QSPI_FLASH_NUM FSL_QSPI_FLASH_SIZE Signed-off-by: Tom Rini

Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment

2022-06-28T21:11:49Z

- Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini

Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOAD

2022-06-28T21:11:49Z

The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini

Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

2022-06-06T16:09:19Z

- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini